Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Winchester 3" Folding Knife2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff HIVIZ Pro Sights7 x VFG Pull Through Match Pocket Set, for 4-4.5mm7 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor8 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Anschütz Biathlon Harness1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x EX Demo - Gerber Metolius Pocket Folder6 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor3 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)5 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)5 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)3 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor4 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor2 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Recknagel Picatinny Bases - Schultz & Larsen1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Krieghoff Front Sight Bead (Standard)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel Picatinny Rail CZ 550 Magnum, Alu [..0064]1 x Teague Precision Choke Key1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff 12b Choke Wrench1 x Krieghoff .410g Choke Wrench1 x Krieghoff Factory Hanger Pin1 x Krieghoff Front Sight Bead (Small)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff 28b Choke Wrench1 x Krieghoff Sight Bead Blanking Screw1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Choke Multi Wrench1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Black Barrel Case (83cm Internal)1 x Gerber GDC Zip Blade1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Safety Catch Locking Screw Wrench1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)
Manufacturers
Useful Information