Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Spares Kit1 x Krieghoff Trigger Screw1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Parker Hale Thread to 8-32 Thread Converter1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)2 x Contessa Quick Release Picatinny Rail1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Spare Ring-to-Base Screws1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Walkstool Steady1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x WalkStool Spare Leg Joints1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Bauer Outdoor 8x21 Binoculars1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x AimZonic Plus Camo Sound Moderator1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Teague Precision Choke Key1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Leather Shell/Cartridge Pouch1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x ERATAC Bubble Level [T0940-0002]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Schmierfix Grease by Liqui Moly1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa Blued Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH
Manufacturers
Useful Information