Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

1 x Anschütz Biathlon Harness2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable3 x Parker Hale Thread to 8-32 Thread Converter1 x K-80 Stock Weight for Balance System1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)4 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Navy Gun Slip1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box2 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Woven Fabric Patch1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Silva Pavé Sport Bike Light White/Black1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Silva Commute Bike Light - Pink1 x LED Lenser Car Charger1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x CR2032 Camelion Lithium Battery1 x Bear Grylls Basic Survival Kit by Gerber1 x Silva Commute Bike Light - Green1 x Krieghoff Front Sight Bead (Standard)1 x AA x 4 Camelion Plus Alkaline Batteries1 x Bauer HD Series 8x25 Binoculars1 x Bear Grylls Scout Essentials Kit1 x Bear Grylls Compact Multi-Tool by Gerber1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x LED Lenser Intelligent Filter Set with Holster2 x Krieghoff Sight Bead Blanking Screw2 x AimZonic Plus Camo Sound Moderator1 x Silva ex10 Distance Pedometer - White1 x Krieghoff Brass Front Sight Bead1 x Krieghoff Brass Mid Sight Bead1 x Silva Dine Duo Kit - Turquoise/White1 x Silva Dine Duo Kit - Purple/White1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Schmierfix Grease by Liqui Moly1 x Black Leather Shell/Cartridge Pouch1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x WalkStool Spare Leg Joints1 x WalkStool Comfort 65 (65cm/26in)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Bauer Outdoor 10x25 Binoculars1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x EX Demo - Gerber Metolius Pocket Folder1 x Gerber Powerframe Knife1 x Clearance Krieghoff Classic Rifle Americase (With Cover)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x K-80 Standard Trigger - Gold Plated1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel SOB02 Silencer (Standard Thread)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x K-80 Standard Trigger - Black Titanium1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Schultz & Larsen Professional Bipod by Spartan1 x K-80 Forward Position Trigger - Steel1 x Krieghoff Stock Removal Wrench1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)
Manufacturers
Useful Information