Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)3 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter3 x Krieghoff HIVIZ Pro Sights1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Woven Fabric Patch2 x Anschütz Biathlon Harness2 x Krieghoff Spares Kit2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Trigger Screw2 x Krieghoff Pro Choke Box1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff 12b Choke Wrench1 x AA x 4 Camelion Plus Alkaline Batteries1 x K-80 Standard Trigger - Titanium2 x Jones Thru-the-Pad Adjuster2 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x Krieghoff Factory Hanger Pin1 x Jones Gun Nut Kit1 x Krieghoff Achievement Badge 200 Straight (Blue)1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x WalkStool Comfort 65 (65cm/26in)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Krieghoff Stock Removal Wrench2 x AAA x 4 Camelion Plus Alkaline Batteries1 x AG3 / 392A Alkaline Batteries (10 Pack)2 x AimZonic Plus Camo Sound Moderator1 x Jones Original Pad Adjuster1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)2 x Bauer Outdoor 8x21 Binoculars1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Black Barrel Case (83cm Internal)2 x Bauer HD Series 8x25 Binoculars1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Shell Bag1 x Bauer HD 8.5x50 Binoculars1 x Krieghoff Comb Wrench (T-Handle)1 x Bauer Outdoor 10x25 Binoculars1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Krieghoff Front Sight Bead (Small)1 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Krieghoff 2018 DTL Badge (Collectors Badge)1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Krieghoff .410g Choke Wrench1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x ERATAC Bubble Level [T0940-0002]1 x CR2032 Camelion Lithium Battery2 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Achievement Badge 25 Straight1 x Hi Viz - How to Become a Better Shooter1 x Krieghoff Ejector Ball and Spring1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa CZ 527 Euro Rail for Quick Release Mount
Manufacturers
Useful Information