Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm3 x Krieghoff Brass Front Sight Bead1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff "K" Denim Cap - Grey1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Woven Fabric Patch2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff Extended Pillars for Adjustable Comb1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Black Leather Shell/Cartridge Pouch1 x Custom Rifles of Great Britain by Bruce Potts1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Bauer Outdoor 8x21 Binoculars1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Spare Blaser Mounting Clamp Parts1 x Krieghoff Sight Bead Blanking Screw1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Walkstool Steady1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x WalkStool Spare Leg Joints1 x Krieghoff Factory Hanger Pin1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 20 MOA1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Jones Gun Nut Kit1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Schultz & Larsen Take Down Rifle Case1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Contessa 34mm Rings for Simple Black - 8.0mm (Medium)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Jones Thru-the-Pad Adjuster1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Quick Release Picatinny Rail1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x K-80 Forward Position Trigger - Black Titanium1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Gerber Basic Fixed Blade Serrated1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Ex-Display Gerber GDC Zip Hex1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench
Manufacturers
Useful Information