Krieghoff Barrel / Stock Stickers

£2.50
20% VAT incl.

Available Options

  • Model:BARREL-STICKER
Krieghoff Barrel / Stock Stickers
Available in Gold, Silver or White.

These high quality vinyl sticker with the "Krieghoff" text logo are designed to be transferred to your Krieghoff Barrels or Stock.

The stickers come as a set of two. So you can attach one either side of your barrels, or attach one to your barrel and one to your stock.

Size: 149mm x 17.5mm
Choose your colour from the drop-down menu above.

How to Apply your Stickers

Step 1 - Prepare It
Lay your sticker on a clean and flat surface with the backing tape (white side) face down and rub over the application tape (clear side) with your squeegee or credit card to ensure the application tape has a good bond to the vinyl letters.

Step 2 - Peel It
Check the positioning of where your sticker will go, so you're ready for the next stage.
Next, peel the application tape (clear side) away from the backing paper (white side). Your sticker letters will now be held by the application tape.
Carefully place the the application tape on to your barrels. Check the alignment as you place it down.

Step 3 - Rub It
While your sticker in laying on your barrels in position, start by rubbing over the application tape and letters gently, and then increase the pressure and firmly rub with your squeegee or credit card. Make sure you cover each letter thoroughly.

Step 4 - Remove It
Carefully peel away the application tape at an angle and corner to corner. The letters should all be transferred onto your barrel. If they are still attached to the application tape, lay the application tape back down and rub over the letter again with the squeegee or credit card. Now, try again until the whole sticker has been transferred.
Your new Krieghoff Barrel / Stock Sticker should now be in place and ready to show off.
If your letters are not coming away from the application tape as you're peeling the application tape off, lay the application tape back over the letter and use the squeegee to rub over the letter again.

Sticker Removal
If you decide to remove the stickers for any reason. Use some light heat such as a hair dryer to aid the removal. The adhesive is permanent but will not damage or mark your barrels. Do not use any abrasive materials or solvents to remove the stickers as this may cause damage to the finish of your barrels.

Postage
We send the Krieghoff Barrel & Stock Stickers with a piece of card to prevent the stickers from being damaged in transit.



You might also like...

2 x Anschütz Biathlon Harness1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)3 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Navy Gun Slip2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Woven Fabric Patch1 x Contessa Picatinny Rail - Howa 1500 Long (20 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff Pro Choke Box2 x Krieghoff Trigger Screw1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x LED Lenser Intelligent Filter Set with Holster2 x AA x 4 Camelion Plus Alkaline Batteries1 x Bauer ED 8x42 Binoculars1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x HJB 6-24x50 Rifle Scope (Mil-Dot)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Bauer HD Series 8x25 Binoculars2 x Ex-Display Gerber GDC Zip Hex1 x Bear Grylls Pocket Tool1 x Bear Grylls Compact Multi-Tool by Gerber1 x Jones Gun Nut Kit1 x Starkie Blue (A.K.A Smurf Poo)1 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Jones Thru-the-Pad Adjuster2 x Jones Original Pad Adjuster1 x Schmierfix Grease by Liqui Moly2 x Black Barrel Case (83cm Internal)2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Teague Precision Choke Key1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Krieghoff Sight Bead Blanking Screw1 x Recknagel Safety for Mauser K98 [30100-5000]1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x K-80 Standard Trigger - Titanium2 x Krieghoff Comb Wrench (T-Handle)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Front Sight Bead (Small)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Krieghoff "K" Mesh Cap - Black1 x Gerber Balance Multi-Tool Black1 x Silva Dine Duo Kit - Turquoise/White1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff "K" Denim Cap - Navy1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Steel Stock Trap Door1 x AimZonic Plus Camo Sound Moderator1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Ebony & Brass 20 Bore Snap Caps1 x Recknagel Front Sight Bead Red [11444-0300]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Recknagel 25.4mm/1 inch Ring Components - 5mm BH1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel QD Sling Swivel - Fixed Standard [23000-0000]1 x Recknagel Grip Cap Flat with Small Edge [24020-0400]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (05)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Gerber Descent - Folding Knife1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Gerber New Myth Series Pocket Folder1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x ERATAC ACI Bubble Level [T0940-0000]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Used Sako P94S, Wooden Stock (.22 LR)
Manufacturers
Useful Information