VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Contessa Quick Release Picatinny Rail1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Jones Gun Nut Kit1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa Spare Screw for Sako 75/85 Rails2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Spare Blaser Mounting Clamp Parts1 x Teague Precision Choke Key1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff Pro Choke Box1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Walkstool Steady1 x Contessa Tactical One Piece Fixed Picatinny Ring Mount - 30mm1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Alu [.2012]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount
Manufacturers
Useful Information