VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Brass Front Sight Bead1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff HIVIZ Pro Sights2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x VFG Adaptor for VFG Rods (Spare)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Navy Canvas Gun Slip1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Spares Kit1 x Recknagel Picatinny Rail Remington 700 S, Alu [..0012]1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Schmierfix Grease by Liqui Moly1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Quick Release Mount for Swarovski Rail2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Quick Release Mount for Zeiss Rail1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Jones Thru-the-Pad Adjuster1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x ERATAC Bubble Level [T0940-0002]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Jones Original Pad Adjuster1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa Spare Ring-to-Base Screws1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Starkie Blue (A.K.A Smurf Poo)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x AimZonic Compact Camo Sound Moderator1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Teague Precision Choke Key1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Contessa Browning BAR Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Burris Scopes1 x WalkStool Set of Spare Red Spring1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Picatinny Blank Rail for Custom Rails (450mm)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Bauer HD Series 8x25 Binoculars1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Walkstool Steady1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x AimZonic Plus Camo Sound Moderator1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)
Manufacturers
Useful Information