VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Krieghoff Trigger Screw1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Navy Canvas Gun Slip1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Jones Original Pad Adjuster1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Mount Base for Bolt Action (Base Only)2 x Contessa Spare Ring-to-Base Screws1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Jones Gun Nut Kit1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Jones Thru-the-Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Spare Blaser Mounting Clamp Parts1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail
Manufacturers
Useful Information