VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)

£27.43
20% VAT incl.


  • Model:333366
VFG Barrel Cleaning Felts for 4-4.5mm
Code: 333366


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres.

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 500 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your rifle is free after each cleaning operation.

Although there doesn't appear to be a hole drilled in the centre of the felts, it is there, but it is very fine.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Krieghoff Brass Front Sight Bead2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Krieghoff HIVIZ Pro Sights1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Krieghoff "K" Logo Cap Navy & White1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Krieghoff Front Sight Bead (Small)1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Recknagel SOB3D Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Jones Thru-the-Pad Adjuster1 x ERATAC Bubble Level [T0940-0002]1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Black Leather Shell/Cartridge Pouch1 x Jones Gun Nut Kit1 x Custom Rifles of Great Britain by Bruce Potts1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff 12b Choke Wrench1 x Jones Original Pad Adjuster
Manufacturers
Useful Information