Schultz & Larsen T-Handle Wrench (Torx 20)

£11.50
20% VAT incl.


  • Model:SL-T20-WRENCH
Schultz & Larsen T-Handle Wrench (Torx 20)

For use with Schultz & Larsen Legacy rifle. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 175mm
Torx 20 Wrench
1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (10 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Krieghoff Spares Kit1 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa 30mm Rings for Simple Black - 5.0mm (Med)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Krieghoff Shell Bag
Manufacturers
Useful Information