Schultz & Larsen T-Handle Wrench (Torx 20)

£11.50
20% VAT incl.


  • Model:SL-T20-WRENCH
Schultz & Larsen T-Handle Wrench (Torx 20)

For use with Schultz & Larsen Legacy rifle. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 175mm
Torx 20 Wrench
4 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)2 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - Sako A7 Short (20 MOA)1 x Krieghoff Brass Mid Sight Bead2 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Krieghoff Sight Bead Blanking Screw1 x Contessa Picatinny Rail - Weatherby Vanguard Short (0 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Krieghoff Navy Canvas Gun Slip1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)2 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]2 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x AimZonic Compact Camo Sound Moderator2 x Contessa Quick Release Mount for Burris/Nikon1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Contessa Picatinny Rail - Sako 75/85 Long (0 MOA)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision
Manufacturers
Useful Information