Schultz & Larsen T-Handle Wrench (Torx 20)

£11.50
20% VAT incl.


  • Model:SL-T20-WRENCH
Schultz & Larsen T-Handle Wrench (Torx 20)

For use with Schultz & Larsen Legacy rifle. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 175mm
Torx 20 Wrench
1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Krieghoff Pro Choke Box1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Spares Kit1 x Ex-Demo Teague Choke Tube, K-80 Parcours #4 (14)1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended
Manufacturers
Useful Information