Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - Sako S20 (20 MOA)2 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Krieghoff Sight Bead Blanking Screw1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Black Barrel Case (83cm Internal)1 x VFG Complete Set for .1771 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Bear Grylls Paracord Fixed Blade1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Krieghoff Brass Mid Sight Bead1 x VFG Adaptor for VFG Rods (Spare)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Schmierfix Grease by Liqui Moly1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master
Manufacturers
Useful Information