Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

1 x Anschütz Biathlon Harness2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (037)1 x Gerber Metolius Pocket Folder1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Krieghoff Spares Kit1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)2 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud2 x AG3 / 392A Alkaline Batteries (10 Pack)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x VFG Complete Set for .1771 x Bauer HD Series 8x25 Binoculars1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Contessa Spare Ring-to-Base Screws1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Krieghoff Brass Mid Sight Bead1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x ERATAC Bubble Level [T0940-0002]1 x Bauer Outdoor 10x25 Binoculars1 x Contessa Spare Blaser Mounting Clamp Parts1 x Jones Thru-the-Pad Adjuster1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x AimZonic Plus Camo Sound Moderator1 x Teague Precision Choke Key1 x AimZonic Compact Camo Sound Moderator1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Starkie Blue (A.K.A Smurf Poo)
Manufacturers
Useful Information