Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£71.56
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)3 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Woven Fabric Patch1 x Schmierfix Grease by Liqui Moly1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Krieghoff "K" Denim Cap - Grey1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff Navy Canvas Gun Slip2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Pro Choke Box1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)
Manufacturers
Useful Information