Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount

£64.00
20% VAT incl.


  • Model:BA31
Contessa Schultz & Larsen - Victory, Classic, Hunter & Ambassador
Euro Rail Base for use with Quick Release Mounts


Length: - 165mm
Weight: - 82g
Height - 5mm BH
Code: BA31
Material:
Blued Steel

Fitting: When fitting, we would always recommend using a thread locker adhesive on the screws. Fit the screws on the rear base first but do not tighten fully, then fit the front screws next but do not fully tighten. Gradually tighten one screw at a time in small increments until all screws are fully tightened and flush. This will ensure a good solid fit to the rifle.

Note: The two rear holes on this rail match up for the Victory, Classic, Hunter and Ambassador 21.8mm. But the second to third holes on the Victory & Ambassador are 2mm further apart than the holes on the Classic and Hunter. This means, the rail has incorporated elongated holes for the front base. This is to allow both of the model variations to fit. This has no loss of accuracy and due to the countersink and design of the hole, it will align perfectly centrally to the action.

For use with Contessa Part:
Quick Release Base (Bolt Action) Code Ref: SB02

This Quick Release Base is precision made by Contessa Alessandro & C. s.n.c. The fixed base is made to fit directly to your rifle, then you use the Contessa Quick Release Base, either one of the possible models available, and using it's QD clamping system you can attach the mount to the base. This system allows you to interchange scopes on a single rifle, and even change a scope to different rifles in seconds using the Contessa system.

The Contessa Euro Rail System -
Find Out More and How it Works

To see the available Quick Release Mounts - Click Here

Contents Supplied:
- 1 x Euro Rail Base for Schultz & Larsen,
- Screws
- Wrench

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.

Fitting and Features Video

3 x Schultz & Larsen Professional Bipod by Spartan3 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Krieghoff "K" Bobble Beanie - Green1 x Krieghoff Shell Bag1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Logo Cap Red & White1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)2 x Krieghoff "K" Bobble Beanie - Royal Blue1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Steel 11mm Dovetail Rings, 16mm BH1 x Krieghoff Sight Bead Blanking Screw1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount2 x Clearance Americase Cordura Case Cover (32x11x3")1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff Steel Middle Hanger (For Parcours)1 x Krieghoff "K" Bobble Beanie - Heather Grey1 x Krieghoff "K" Bobble Beanie - Burgundy2 x ERATAC Bubble Level [T0940-0002]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Clearance Americase Cordura Case Cover (37x11x3.5")1 x Krieghoff "K" Bobble Beanie - Navy1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff "K" Logo Cap Black & White1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Bear Grylls Paracord Fixed Blade1 x VFG Complete Set for .1771 x Silva Dine Duo Kit - Purple/White1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Black Barrel Case (83cm Internal)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Bear Grylls Ultimate Pack with Multi-Tool
Manufacturers
Useful Information
Reviews
Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser
Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser
£481.00
20% VAT incl.

I have 2 of these rails now for mounted IOR Reccon scope and...