VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)

£13.73
20% VAT incl.


  • Model:342628
VFG Intensive Barrel Cleaning Felts for 9mm
Code: 342628


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel.

The 9mm felts are recommended for the following calibres: 9mm, .350 Rem. Mag., .358 Norma Mag., .38 SuperAuto, .357 SIG, .38-45 ACP, .38 Long Colt, .357 Mag., .38 WC.
See which Felts suit your Calibre >>>

Supplied as small box containing: 40 felt screw-on pellets
(Also available: 9mm standard felts - box of 50, for extensive usage and better value)

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) N/A
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Picatinny Rail Remington 700 S, 20 MOA, Steel [..2012]1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Picatinny Rail - Sako 75/85 Long (20 MOA) Adjustable3 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x AimZonic Plus Camo Sound Moderator2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x ERATAC Bubble Level [T0940-0002]2 x Contessa QD Low Mount for Pulsar Night Vision (Euro Rail)1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Adaptor for VFG Rods (Spare)1 x Black Barrel Case (83cm Internal)2 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Quick Release Picatinny Rail2 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]2 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Bear Grylls Paracord Fixed Blade1 x Contessa Picatinny Rail - Sako TRG 22 / 42 (20 MOA)2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Quick Release Mount for Zeiss Rail1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x VFG Complete Set for .1771 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sauer 202 (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Silva Dine Duo Kit - Purple/White2 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Krieghoff Choke Multi Wrench1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Factory Hanger Pin1 x Jones Thru-the-Pad Adjuster
Manufacturers
Useful Information