Used (03) Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA)

20% VAT incl.

  • Model:PH13/0/U3
USED Picatinny Rail - This is an older style picatinny rail with two screws per base. The design of the rail has been updated with an adjustable front base, so this version is no longer supplied. There is some very slight signs of wear on the inner dovetails. But nothing noticeable when the rail is on the rifle.

Contessa Picatinny Rail for Sako 75* / 85 Medium
With 0 MOA
Fits Sako Models: 75* / 85 (Check the size of your action)

Rail Length: - 144mm
Height (BH) - 11.5mm
Weight: - 156g
Material: - Steel
Code Ref: PH13/0/U3

Contents Supplied:
- 1x Steel Rail,
- 1x Wrench,

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

You can't always tell which size Sako action you have from the calibre, so to check which rail fits your rifle all you need to do is measure the length between your two bases, i.e. measure the length of your ejection port.
If it's approx. 74mm you need the Sako Short Rail.
If it's approx. 84mm you need the Sako Medium Rail.
If it's approx. 94mm you need the Sako Long Rail.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 84mm / 30mm (Dovetail Base)

A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
3 x Schultz & Larsen Professional Bipod by Spartan3 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Krieghoff "K" Bobble Beanie - Green1 x Krieghoff Shell Bag1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Logo Cap Red & White1 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)2 x Krieghoff "K" Bobble Beanie - Royal Blue1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Steel 11mm Dovetail Rings, 16mm BH1 x Krieghoff Sight Bead Blanking Screw1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount2 x Clearance Americase Cordura Case Cover (32x11x3")1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff Steel Middle Hanger (For Parcours)1 x Krieghoff "K" Bobble Beanie - Heather Grey1 x Krieghoff "K" Bobble Beanie - Burgundy1 x ERATAC Bubble Level [T0940-0002]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Clearance Americase Cordura Case Cover (37x11x3.5")1 x Krieghoff "K" Bobble Beanie - Navy1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff "K" Logo Cap Black & White1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Bear Grylls Paracord Fixed Blade1 x VFG Complete Set for .1771 x Silva Dine Duo Kit - Purple/White1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Black Barrel Case (83cm Internal)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)
Useful Information
Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)
Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)
20% VAT incl.

Does NOT fit to my CZ 550 Magnum .458 WIN MAG....