Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)

£148.61
20% VAT incl.


  • Model:PH31/C/0
Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)
Contessa Satin Chromed Picatinny Rail for Sako 85 X-Short
With 0 MOA
Fits Sako Models: 75* / 85 XS

Rail Length: - 116mm
Height (BH) - 12.5mm Approx.
Weight: - 140g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 56mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.



You might also like...

Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)
Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)
£157.45
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x AimZonic Plus Camo Sound Moderator1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x AimZonic Compact Camo Sound Moderator2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Walkstool Steady1 x WalkStool Set of Spare Red Spring1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Spare Leg Joints1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)4 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x Teague Precision Choke Key2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Complete Set for .1771 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff "K" Denim Cap - Navy1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x ERATAC Bubble Level [T0940-0002]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Pro Choke Box1 x Krieghoff Spares Kit1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]3 x Krieghoff Brass Front Sight Bead1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Black Leather Shell/Cartridge Pouch1 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Starkie Blue (A.K.A Smurf Poo)1 x Custom Rifles of Great Britain by Bruce Potts1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)1 x Black Barrel Case (83cm Internal)1 x Schmierfix Grease by Liqui Moly1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Jones Thru-the-Pad Adjuster1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Jones Original Pad Adjuster1 x Jones Gun Nut Kit1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Bauer Outdoor 10x25 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer Outdoor 8x21 Binoculars1 x Anschütz Biathlon Harness1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Pull Through Pocket Set for .22 Upwards2 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Recknagel SOB3D Silencer (ERA LOC)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel SOB3D Silencer (Standard Thread)1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Winchester 3" Folding Knife1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x VFG Adaptor for VFG Rods Brass1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa 34mm Rings for Simple Black - 6.5mm (Medium)1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa 25.4mm Rings for Simple Black - 5.0mm (Medium)1 x Krieghoff Front Sight Bead (Small)1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa 40mm Rings for Simple Black - 6.0mm (Medium)1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Quick Release Picatinny Rail1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Ex-Display Gerber GDC Zip Hex1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Silva Commute Bike Light - Green1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Blued Ergal Picatinny Rings - 36mm (8mm BH)1 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Silva Commute Bike Light - Pink1 x Gerber Paraframe II Fine Edge Knife1 x Gerber Powerframe Knife1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Ex-Demo K-80 Steel 12b Hanger #5
£13,698.68
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA) Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable