Contessa QD Mount for ATN 4K Night Vision (Picatinny)

£390.31
20% VAT incl.


  • Model:SBP10
Contessa QD Mount for ATN 4K Night Vision (Picatinny)
Contessa, Quick Detachable Mount for Picatinny
Designed for the ATN 4K Night Vision Scope

Length: 160mm
Length of Picatinny on Ring Cap: 35mm
Height with Rings (BH): 18.5mm
Height without Rings (BH): 12.5mm
Weight: 275g
Code: SBP10
Extends Backwards from Rear Lug: 65mm
Distance Between Rings: 109mm

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel
- Complete with screws for mounting the Pulsar

The Contessa Quick Release Mount for ATN 4K features two 30mm Rings spaced perfectly apart to be able to mount the scope. The front ring has a Universal Interface Ring Cap with a 35mm Picatinny Rail offset to the one side, to be able to mount a UV Lamp. This ring cap can be swapped with the rear ring cap and the section of picatinny mounted to the right of left side.

The mount will fit any existing picatinny rail and uses a solid recoil lug bar on the underside of the mount, with a quick release lever to lock the rail onto the picatinny rail. Due to the quick release lever being set at the same tension when attached, the mount retains the same solid mount each time you fit it back on to the picatinny rail. Although the method of attachment is highly accurate, due to the nature of the picatinny system, it may not always be possible to achieve 100% repeatable zero depending on the mounting procedure, but the accuracy will certainly be within 1 MOA. This is common throughout the whole Contessa Quick Release series.

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here


Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Quick Release Mounts Here.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

VFG Barrel Cleaning Felts for 6mm (Box of 50)
VFG Barrel Cleaning Felts for 6mm (Box of 50)
£7.48
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
1 x Schmierfix Grease by Liqui Moly2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)3 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Pull Through Pocket Set for .22 Upwards1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box2 x Krieghoff Trigger Screw1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)2 x Krieghoff HIVIZ Pro Sights1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)4 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Krieghoff Brass Front Sight Bead4 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount3 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)3 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Sako Short, Alu [..0014]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Anschütz Biathlon Harness2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Krieghoff K-Diamond Beanie - Navy1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Jones Thru-the-Pad Adjuster1 x Black Barrel Case (83cm Internal)2 x Starkie Blue (A.K.A Smurf Poo)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x Jones Gun Nut Kit1 x Custom Rifles of Great Britain by Bruce Potts2 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Krieghoff Front Sight Bead (Small)1 x Bauer Outdoor 8x21 Binoculars1 x ERATAC Bubble Level [T0940-0002]1 x Bauer Outdoor 10x25 Binoculars2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff Sight Bead Blanking Screw1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff "K" Logo Cap Black & White2 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Krieghoff "K" Denim Cap - Grey1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x K-80 Standard Trigger - Steel1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa Picatinny Rail - Baikal (0 MOA)1 x WalkStool Comfort 65 (65cm/26in)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8525]1 x Gerber Gator Combo Replacement Saw1 x Krieghoff Navy Gun Slip1 x Krieghoff Choke Multi Wrench1 x Gerber Myth Series Fixed Saw1 x Schultz & Larsen Torx Key for Scope Mounts1 x Briley 20b Speed Wrench - For Krieghoff1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff 2009 Badge (Collectors Badge)1 x Ex-Demo Briley Choke Tube, K-80 Parcours - FULL (01)1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Clearance Americase Cordura Case Cover (32x11x3")1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Krieghoff Factory Hanger Pin1 x Ex-Display Gerber GDC Zip Hex2 x AA x 4 Camelion Plus Alkaline Batteries1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Contessa Spare Screw for Sako 75/85 Rails1 x Krieghoff K-Diamond Beanie - Heather Grey1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Woven Fabric Patch1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Jones Original Pad Adjuster1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x K-80 Barrel Weight Balance System1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Gold Titanium1 x Schultz & Larsen Superdome Moderator (Over Barrel)
£17,284.41
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa One Piece QD Picatinny Mount with Rings Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Contessa QD Mount for ATN 4K Night Vision (Picatinny)