Contessa QD Mount for ATN 4K Night Vision (Picatinny)

£390.31
20% VAT incl.


  • Model:SBP10
Contessa QD Mount for ATN 4K Night Vision (Picatinny)
Contessa, Quick Detachable Mount for Picatinny
Designed for the ATN 4K Night Vision Scope

Length: 160mm
Length of Picatinny on Ring Cap: 35mm
Height with Rings (BH): 18.5mm
Height without Rings (BH): 12.5mm
Weight: 275g
Code: SBP10
Extends Backwards from Rear Lug: 65mm
Distance Between Rings: 109mm

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel
- Complete with screws for mounting the Pulsar

The Contessa Quick Release Mount for ATN 4K features two 30mm Rings spaced perfectly apart to be able to mount the scope. The front ring has a Universal Interface Ring Cap with a 35mm Picatinny Rail offset to the one side, to be able to mount a UV Lamp. This ring cap can be swapped with the rear ring cap and the section of picatinny mounted to the right of left side.

The mount will fit any existing picatinny rail and uses a solid recoil lug bar on the underside of the mount, with a quick release lever to lock the rail onto the picatinny rail. Due to the quick release lever being set at the same tension when attached, the mount retains the same solid mount each time you fit it back on to the picatinny rail. Although the method of attachment is highly accurate, due to the nature of the picatinny system, it may not always be possible to achieve 100% repeatable zero depending on the mounting procedure, but the accuracy will certainly be within 1 MOA. This is common throughout the whole Contessa Quick Release series.

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here


Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Quick Release Mounts Here.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

VFG Barrel Cleaning Felts for 6mm (Box of 50)
VFG Barrel Cleaning Felts for 6mm (Box of 50)
£7.48
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
6 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor6 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor5 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor4 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Krieghoff Trigger Screw1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Pro Choke Box1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Krieghoff Spares Kit1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Winchester 3" Folding Knife1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff HIVIZ Pro Sights4 x VFG Pull Through Match Pocket Set, for 4-4.5mm4 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor4 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Anschütz Biathlon Harness1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x EX Demo - Gerber Metolius Pocket Folder3 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff Brass Front Sight Bead1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm
£6,046.18
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa One Piece QD Picatinny Mount with Rings Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Contessa QD Mount for ATN 4K Night Vision (Picatinny)