K-80 Forward Position Trigger - Black Titanium

£365.00
20% VAT incl.


  • Model:ZTL001889-BLK
The Krieghoff Black Titanium Forward Position Trigger Blade

Please Note: The Black Titanium Forward Trigger is available to purchase with an estimated 7-10 day delivery time.

This new style titanium trigger blade from Krieghoff provides a more secure location for your finger in all weather conditions. The vented surface allows water to drain away on the wettest day and your finger locks into the slots. It looks great with the Black Titanium Hanger.

The Black Titanium Trigger fits all new model K-80 guns that have the trigger blade attached on a T-slot rail. Earlier guns had a dovetail. If you wish to fit a TT trigger on an earlier gun then you will also need a trigger upgrade. This can be done in our Krieghoff Service facility. Normally we recommend that you send the receiver of your gun to have the trigger fitted. It is possible to fit the blade yourself but please note the instructions you can read by reading the installation Procedure. The Trigger Pulls differ between a Standard Trigger and a Forward Position Trigger. The forward position trigger is 1/4 lb heavier.

Fitting:

The K80 trigger blade is adjustable for position along a slide. There are two set screws on the underside of the trigger blade. The screw socket takes a 1.27mm wrench, 0.050" or 1/20th inch imperial. Use a Krieghoff Trigger/Selector Wrench. The rearmost screw locks the blade onto the slide whilst the front screw locks the barrel selector positioned immediately in front of the trigger blade. There are two trigger blade types, standard position and forward position. The standard blade has both screws in front of the curved blade whilst the forward position trigger has one screw in front and one directly behind the blade. Function of the two screws is the same.

To move the trigger blade, slacken the rear screw but note that the front screw, if locked, will also lock the trigger blade. The front screw has to be far enough out to allow the blade to slide so if it will not move try backing that screw out some more. Occasionally, the blade will be stuck on the slide but is easily freed with a nylon drift. Make sure both screws are free before tapping the blade with anything. Once in position, tighten the rearmost screw to lock the blade on the slide.

To lock the selector, tighten the front screw until the selector cannot be switched left to right. To release the selector, simply slacken that screw off again.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.


Watch the Trigger Replacement Instructional Video here:
1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Shell Bag1 x Gerber GDC Zip Blade2 x Jones Thru-the-Pad Adjuster2 x Krieghoff Navy Canvas Gun Slip1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Krieghoff Spares Kit2 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)2 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Schultz & Larsen Take Down Rifle Case1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Picatinny Rail - Ruger American (0 MOA)2 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Krieghoff Trigger Screw1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Krieghoff Extended Pillars for Adjustable Comb1 x Starkie Blue (A.K.A Smurf Poo)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Bauer Outdoor 10x25 Binoculars2 x Clearance Americase Cordura Case Cover (32x11x3")1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x K-80 Stock Weight for Balance System1 x Krieghoff Safety Catch Locking Screw Wrench1 x Bauer Outdoor 8x21 Binoculars1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Choke Multi Wrench1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)
Manufacturers
Useful Information