Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)

£148.61
20% VAT incl.


  • Model:PH14/C/10
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 10 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 154mm
Height (BH) - 12.5mm Approx.
Weight: - 175g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA
Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)2 x Schmierfix Grease by Liqui Moly2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Brass Front Sight Bead2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Navy Gun Slip1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Krieghoff Pro Choke Box1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Krieghoff Spares Kit1 x Winchester 3" Folding Knife2 x Krieghoff Trigger Screw1 x Anschütz Biathlon Harness3 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Krieghoff Woven Fabric Patch2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Schultz & Larsen Venom Moderator (Over Barrel)2 x AimZonic Plus Camo Sound Moderator1 x Schultz & Larsen Ultradome Moderator (Over Barrel)3 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x AimZonic Compact Camo Sound Moderator3 x Schultz & Larsen Venom Moderator (Muzzle Mounted)3 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Schultz & Larsen Ultra Venom Moderator (Over Barrel)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Schultz & Larsen Micro Moderator (Muzzle Mounted)1 x Recknagel SOB02 Silencer (Standard Thread)1 x VFG Barrel Cleaning Felts for .45 (Box of 30)3 x Recknagel SOB3D Silencer (ERA LOC)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x Jones Gun Nut Kit1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]2 x Krieghoff Comb Wrench (T-Handle)2 x Jones Thru-the-Pad Adjuster1 x K-80 Standard Trigger - Steel1 x Black Leather Shell/Cartridge Pouch2 x Recknagel Front Ramp [12000-0000]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Custom Rifles of Great Britain by Bruce Potts1 x Jones Original Pad Adjuster1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Starkie Blue (A.K.A Smurf Poo)1 x Recknagel Steel Stock Trap Door1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff Front Sight Bead (Small)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]2 x Krieghoff Sight Bead Blanking Screw1 x Schultz & Larsen Take Down Rifle Case1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x K-80 Forward Position Trigger - Black Titanium1 x Recknagel Grip Cap Domed Blank [24000-0400]1 x MSA Sordin - Hygiene Kit - Foam Seals1 x K-80 Barrel Weight Balance System1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Grip Cap Compartment1 x Recknagel Front Sight Bead White [11442-0300]2 x Krieghoff Extended Pillars for Adjustable Comb1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Recknagel Front Sight Bead Red [11444-0300]2 x Black Barrel Case (83cm Internal)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Brass Mid Sight Bead2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Krieghoff 12b Choke Wrench1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x WalkStool Spare Leg Joints1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Forward Position Trigger - Steel1 x K-80 Standard Trigger - Black Titanium1 x Walkstool Steady1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff HIVIZ Pro Sights1 x K-80 Standard Trigger - Titanium1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x K-80 Standard Trigger - Gold Plated2 x Recknagel SOB3D Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Trigger & Selector Locking Wrench1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x K-80 Forward Position Trigger - Gold Titanium2 x Recknagel Leaf Sight 19mm [15235-3019]1 x Krieghoff Factory Hanger Pin1 x Silva Pavé Sport Bike Light White/Black1 x Silva Commute Bike Light - Green1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Adaptor for VFG Rods (Spare)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x AAA x 4 Camelion Plus Alkaline Batteries1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Bauer HD 8.5x50 Binoculars1 x Krieghoff 2013 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Recknagel Grip Cap Full Domed [24000-0100]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Recknagel Detachable Sling Swivel 20mm Loop - 8mm Stud1 x Recknagel 36mm Ring Components - 5mm BH1 x Used Nightforce NP2-DD 8-32x56 Rifle Scope1 x Schultz & Larsen T-Handle Wrench (Torx 20)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x AA x 4 Camelion Plus Alkaline Batteries2 x Krieghoff Achievement Badge 25 Straight1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Krieghoff Achievement Badge 200 Straight (Black)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Short (20 MOA) Adjustable
Manufacturers
Useful Information