Contessa Satin Chromed Picatinny Rail - Sako 85 Med (0 MOA)

£148.61
20% VAT incl.


  • Model:PH13/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Medium
With 0 MOA
Fits Sako Models: 75* / 85

Rail Length: - 144mm
Height (BH) - 12.5mm Approx.
Weight: - 165g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1x Satin Chromed Steel Rail,
- 1x Wrench,

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 84mm / 30mm (Dovetail Base)

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA
Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x Schultz & Larsen Professional Bipod by Spartan4 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff "K" Beanie - Plum2 x Krieghoff Shell Bag1 x Krieghoff Shooter's Towel - Black2 x Krieghoff Spares Kit1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Mount for Burris/Nikon1 x Krieghoff Comb Wrench (T-Handle)1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x K-80 Barrel Weight Balance System1 x Silva Pavé Sport Bike Light White/Black1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Bauer Power LED L-XL1 Torch2 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa Picatinny Rail - Bergara B14 Long (0 MOA)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Gerber Metolius Pocket Folder2 x Krieghoff Trigger Screw1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Contessa Blued Steel Picatinny Rings - 36mm (8mm BH)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Bear Grylls Compact Multi-Tool by Gerber1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x K-80 Stock Weight for Balance System1 x Krieghoff 2009 Badge (Collectors Badge)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Krieghoff 12b Choke Wrench1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Krieghoff K-Diamond Beanie - Heather Navy3 x Jones Thru-the-Pad Adjuster2 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 03 [8336]1 x Custom Rifles of Great Britain by Bruce Potts1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Walkstool Steady1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff Extended Pillars for Adjustable Comb1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Contessa Picatinny Rail - Browning A Bolt 3 Long (0 MOA) Extended1 x Contessa Browning European Euro Rail for Quick Release Mount1 x K-80 Standard Trigger - Gold Plated2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Med (0 MOA)1 x K-80 Standard Trigger - Titanium1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Krieghoff K-Diamond Beanie - Navy1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Silva ex10 Distance Pedometer - White1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)
Manufacturers
Useful Information