Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
6 x Schmierfix Grease by Liqui Moly3 x Krieghoff Spares Kit4 x Krieghoff Comb Wrench (T-Handle)5 x Jones Thru-the-Pad Adjuster4 x Krieghoff Brass Front Sight Bead5 x Krieghoff Extended Pillars for Adjustable Comb5 x K-80 Barrel Weight Balance System5 x K-80 Stock Weight for Balance System1 x Krieghoff Woven Fabric Patch5 x Black Barrel Case (83cm Internal)1 x K-80 Standard Trigger - Black Titanium3 x K-80 Forward Position Trigger - Titanium2 x Krieghoff Pro Choke Box4 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x K-80 Standard Trigger - Titanium3 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x K-80 Standard Trigger - Gold Titanium2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)3 x K-80 Forward Position Trigger - Gold Titanium2 x Black Leather Shell/Cartridge Pouch2 x Ebony & Brass 20 Bore Snap Caps3 x WalkStool Comfort 65 (65cm/26in)2 x WalkStool Set of Spare Red Spring1 x WalkStool Spare Leg Joints2 x Walkstool Steady1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x AimZonic Compact Camo Sound Moderator1 x AimZonic Plus Camo Sound Moderator1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)3 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC Offset UNI-Interface for Docter Sight [T0930-0000]2 x MSA Sordin - Hygiene Kit - Foam Seals1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)2 x Krieghoff Trigger Screw2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Krieghoff HIVIZ Pro Sights2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Krieghoff K-80 Sport Logo Cap Navy & Red2 x Krieghoff "K" Denim Cap - Grey2 x Krieghoff Factory Hanger Pin1 x ERATAC Bubble Level [T0940-0002]2 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Front Sight Bead (Small)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Krieghoff C-Clips (E-Clips)3 x Krieghoff Navy Gun Slip2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Teague Precision Choke Key1 x Krieghoff Shell Bag2 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x Briley 20b Speed Wrench - For Krieghoff1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes3 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff Choke Multi Wrench1 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff .410g Choke Wrench1 x Krieghoff 12b Choke Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x Krieghoff 28b Choke Wrench3 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench2 x K-80 Forward Position Trigger - Steel1 x Krieghoff Ejector Ball and Spring1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]2 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8331]1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8034]1 x Krieghoff K-Diamond Beanie - Heather Grey1 x Krieghoff K-Diamond Beanie - Grey2 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8717]1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Krieghoff K-Diamond Beanie - Burgundy2 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Krieghoff K-Diamond Beanie - Navy1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]7 x Jones Original Pad Adjuster1 x Krieghoff Front Sight Bead (Standard)2 x Starkie Blue (A.K.A Smurf Poo)1 x Krieghoff Stock Removal Wrench1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Picatinny Rail - Merkel Helix (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x LED Lenser Car Charger1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x K-80 Forward Position Trigger - Gold Plated1 x Bauer HD 8x42 Binoculars1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Gerber GDC Zip Blade1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Custom Rifles of Great Britain by Bruce Potts3 x K-80 Standard Trigger - Gold Plated1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Steel1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Krieghoff Classic "Big Five" Badge1 x Recknagel Grip Cap Full Domed [24000-0100]
Manufacturers
Useful Information