Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x VFG Barrel Cleaning Felts for .22 (Box of 80)4 x Contessa Picatinny Rail - Sako S20 (20 MOA)3 x VFG Complete Set for .1771 x VFG Wipe Length Stopper & Guide for Rifles3 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Krieghoff Shell Bag1 x VFG Barrel Cleaning Felts for .44 (Box of 30)3 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended3 x VFG Pull Through Pocket Set for .22 Upwards1 x Krieghoff "K" Bobble Beanie - Royal Blue2 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Blued Steel Picatinny Rings - 40mm (14.5mm BH)2 x Contessa QD Low Mount for Pulsar Night Vision (Picatinny)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for .375 (Box of 500)2 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Krieghoff "K" Mesh Cap - Grey2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x ERATAC 36mm Ring with UNI-Interface [03680-5736]1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)2 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x ERATAC M-Lok Adaptor for HK Hook [T5500-0000]1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Spares Kit1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (20)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #0 (17)2 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Krieghoff Trigger Screw1 x Schultz & Larsen Take Down Rifle Case1 x Contessa Picatinny Rail - Tikka M55 (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Schultz & Larsen Picatinny Rings 30mm, 4mm BH, Alu2 x Krieghoff C-Clips (E-Clips)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Silva Dine Duo Kit - Purple/White1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x K-80 Forward Position Trigger - Black Titanium2 x Contessa Tikka T3 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium - Extended1 x Contessa Picatinny Rail - Tikka T1 / T1X (20 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 20 MOA, Alu [..2081]1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Black Barrel Case (83cm Internal)1 x Krieghoff Fine Leather Gun Case (K-80 Parcours)1 x Clearance Americase Cordura Case Cover (32x11x3")2 x Krieghoff 12b Choke Wrench1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]2 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Adaptor for VFG Rods Brass1 x Bear Grylls Pocket Tool1 x Starkie Blue (A.K.A Smurf Poo)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x ERATAC KeyMod Picatinny Rail. 7 Slots [T4907-0010]1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (20 MOA)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Contessa Quick Release Mount for Burris/Nikon1 x Contessa Picatinny Rail - Howa 1500 Long (20 MOA)1 x K-80 Standard Trigger - Black Titanium1 x ERATAC KeyMod Picatinny Rail, 3 Slots [T4903-0010]1 x ERATAC 34mm One Piece Extended Ring Mount (Lever)1 x Briley 20b Speed Wrench - For Krieghoff2 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x ERATAC Offset UNI-Interface to UNI-Interface [T0960-0005]1 x Krieghoff Choke Multi Wrench1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Krieghoff Factory Hanger Pin1 x Bear Grylls Ultra Compact Knife1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (20 MOA)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x ERATAC Picatinny Riser Mount Block (QD)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Quick Release Picatinny Rail1 x Contessa Quick Release Picatinny Extended Rail (Night Vision)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x ERATAC KeyMod Adaptor for HK Hook [T4500-0000]1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Contessa Sako 75/85 Short Euro Rail for Quick Release Mount1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)2 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Contessa Picatinny Rail - Browning A Bolt 3 Short (0 MOA)1 x ERATAC Picatinny to Harris Bipod Adaptor, Sliding Block (Nut)1 x Bear Grylls Compact Multi-Tool by Gerber1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Contessa Winchester 70 L Euro Rail for QR Mount1 x Schmierfix Grease by Liqui Moly1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)1 x VFG Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x ERATAC Bubble Level [T0940-0002]1 x Contessa Winchester 70 S Euro Rail Base for QR Mounts1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Contessa Picatinny Rail - Sako A7 Long (0 MOA)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff Extended Pillars for Adjustable Comb1 x K-80 Stock Weight for Balance System1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Picatinny Rail Merkel SR1, Alu [..0098]1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Gerber Balance Multi-Tool Black1 x Recknagel Picatinny Rail Browning X Bolt Short, Alu [..001P]1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x Silva Dine Duo Kit - Turquoise/White1 x K-80 Standard Trigger - Steel1 x ERATAC M-Lok Adaptor for Harris Bipod [T5390-0005]1 x Bear Grylls Basic Survival Kit by Gerber1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa 30mm Steel 11mm Dovetail Rings, 16mm BH1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)
Manufacturers
Useful Information