Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x Krieghoff Woven Fabric Patch3 x Krieghoff HIVIZ Pro Sights2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Recknagel QD Sling Swivel Socket - Rotating, Flat [..-1010]1 x Recknagel Picatinny Rail Bergara B14 Short, Alu [..0012]2 x Schmierfix Grease by Liqui Moly2 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)3 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Krieghoff Brass Front Sight Bead2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Anschütz Biathlon Harness1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x K-80 Stock Weight for Balance System1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x ERATAC Bubble Level [T0940-0002]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x WalkStool Set of Spare Red Spring1 x WalkStool Comfort 65 (65cm/26in)1 x Starkie Blue (A.K.A Smurf Poo)2 x AimZonic Plus Camo Sound Moderator1 x Black Barrel Case (83cm Internal)1 x WalkStool Spare Leg Joints1 x AimZonic Compact Camo Sound Moderator1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Walkstool Steady2 x Bauer - Aluminium 11mm Dovetail 30mm Rings (14mm High)1 x Clearance Americase Cordura Case Cover (32x11x3")2 x Winchester 3" Folding Knife1 x Used Sako P94S, Wooden Stock (.22 LR)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x Ex-Demo Contessa One Piece QD Picatinny Mount Body1 x LED Lenser Car Charger2 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x LED Lenser Intelligent Filter Set with Holster2 x EX Demo - Gerber Metolius Pocket Folder1 x Gerber New Myth Series Pocket Folder1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)2 x Krieghoff "K" Mesh Cap - Black1 x Ex-Display Gerber GDC Zip Hex2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Gerber Gator Combo Replacement Saw1 x Gerber Metolius Pocket Folder1 x Black Leather Shell/Cartridge Pouch1 x Recknagel Front Ramp Hood ATV [13093-1810]1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel SOB Silencer ERA LOC Thread Bushing1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x K-80 Forward Position Trigger - Gold Plated2 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 02 [8722]1 x Krieghoff C-Clips (E-Clips)2 x Krieghoff Front Sight Bead (Standard)1 x Contessa Picatinny Rail - Bergara B14 Short (0 MOA)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Krieghoff Achievement Badge 25 Straight1 x Schultz & Larsen Take Down Rifle Case1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x K-80 Standard Trigger - Gold Titanium1 x Krieghoff Factory Hanger Pin1 x Krieghoff 28b Choke Wrench2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley T Wrench for K-80 Parcours Briley Chokes1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff "K" Logo Cap Black & White1 x Krieghoff "K" Collectors Badge1 x Recknagel Replacement Polyform Lever [00088-5700]1 x K-80 Barrel Weight Balance System1 x Krieghoff Extended Pillars for Adjustable Comb1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Silva Commute Bike Light - Pink1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Standard Banded Swivel Ring [22620-....]1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Contessa Remington 700 Long Euro Rail for QR Mounts1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Krieghoff K-Diamond Beanie - Heather Navy1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel Picatinny Bases - Remington 700 (8-40)1 x Recknagel Picatinny QD Rings 30mm [57530-0500]1 x Recknagel Picatinny Bases - Remington 700 (6-48)1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x ERATAC 25.4mm Ring with UNI-Interface [03680-5726]1 x Recknagel Tactical Ring Inlays 30mm to 1" [T0991-0000]1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]
Manufacturers
Useful Information