Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
2 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x K-80 Barrel Weight Balance System1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)10 x VFG Magnetic Felt Clamps for Vices - 125mm11 x VFG Wipe Length Stopper & Guide - Shotgun7 x VFG Magnetic Felt Clamps for Vices - 100mm2 x Krieghoff Front Sight Bead (Small)8 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x Krieghoff Sight Bead Blanking Screw1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud9 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)5 x VFG Magnetic Felt Clamps for Vices - 150mm2 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness2 x Krieghoff HIVIZ Pro Sights1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)5 x VFG Magnetic Felt Clamps for Vices - 80mm1 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x Krieghoff Trigger Screw2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Spares Kit3 x Krieghoff Pro Choke Box1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Winchester 3" Folding Knife1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Forward Position Trigger - Steel1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]3 x Jones Thru-the-Pad Adjuster1 x LED Lenser Car Charger2 x Krieghoff Brass Mid Sight Bead1 x Jones Gun Nut Kit1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Ex-Demo K-80 Steel 12b Hanger #61 x Gerber Powerframe Knife1 x Gerber New Myth Series Pocket Folder1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]2 x Jones Original Pad Adjuster1 x EX Demo - Gerber Metolius Pocket Folder1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x AimZonic Plus Camo Sound Moderator1 x Gerber Gator Combo Replacement Saw1 x Schultz & Larsen Thunderdome Moderator (Over Barrel)1 x K-80 Standard Trigger - Black Titanium1 x Clearance Krieghoff K-20 2-Barrel Americase (No Cover)1 x Krieghoff 28b Choke Wrench1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Krieghoff "K" Logo Cap Black & White1 x K-80 Standard Trigger - Gold Plated1 x Krieghoff .410g Choke Wrench2 x Gerber Myth Series Fixed Saw1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Recknagel SOB01 Silencer (Standard Thread)1 x Schultz & Larsen Superdome Moderator (Over Barrel)2 x Krieghoff 12b Choke Wrench1 x K-80 Standard Trigger - Gold Titanium1 x Schultz & Larsen Ultradome Moderator (Over Barrel)1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x K-80 Forward Position Trigger - Black Titanium1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Krieghoff Choke Multi Wrench1 x Recknagel SOB02 Silencer (Standard Thread)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Schultz & Larsen Thunderdome Moderator (Muzzle Mounted)1 x Recknagel SOB3D Silencer (ERA LOC)1 x K-80 Forward Position Trigger - Titanium1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Black Barrel Case (83cm Internal)1 x Krieghoff Safety Catch Locking Screw Wrench2 x Gerber Basic Fixed Blade Serrated1 x Gerber Metolius Pocket Folder1 x Krieghoff Trigger & Selector Locking Wrench1 x Silva Commute Bike Light - Pink1 x Silva Pavé Sport Bike Light White/Black1 x Silva Dine Duo Kit - Purple/White1 x Silva Commute Bike Light - Green1 x Gerber GDC Zip Blade1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Schultz & Larsen Torx Key for Scope Mounts1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Factory Hanger Pin1 x Gerber Paraframe II Fine Edge Knife1 x Gerber Dime Multi-Tool (Lime)1 x EX Demo - Gerber Steady Tool (Phone Tripod)1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Comb Wrench (T-Handle)1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Ex-Display Gerber GDC Zip Hex1 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]1 x K-80 Stock Weight for Balance System1 x Krieghoff Brass Front Sight Bead1 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)
Manufacturers
Useful Information