Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x Schultz & Larsen Professional Bipod by Spartan2 x Krieghoff Brass Front Sight Bead3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Anschütz Biathlon Harness1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Winchester 3" Folding Knife1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Navy Gun Slip1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x ERATAC Bubble Level [T0940-0002]1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)2 x K-80 Forward Position Trigger - Titanium1 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Safety for Mauser K98 [30100-5000]2 x Teague Precision Choke Key3 x Krieghoff Pro Choke Box1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x K-80 Forward Position Trigger - Gold Plated2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x K-80 Standard Trigger - Titanium1 x Schultz & Larsen Ultradome Moderator (Over Barrel)2 x K-80 Standard Trigger - Black Titanium1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Ejector Ball and Spring1 x Krieghoff C-Clips (E-Clips)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Comb Wrench (T-Handle)2 x Krieghoff Brass Mid Sight Bead1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)2 x K-80 Barrel Weight Balance System2 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Extended Pillars for Adjustable Comb1 x WalkStool Set of Spare Red Spring1 x Krieghoff Trigger Screw1 x Jones Gun Nut Kit1 x K-80 Standard Trigger - Gold Titanium2 x Jones Thru-the-Pad Adjuster1 x Krieghoff Stock Removal Wrench1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Schultz & Larsen Take Down Rifle Case1 x Starkie Blue (A.K.A Smurf Poo)1 x Recknagel Front Ramp [12000-0000]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Recknagel Folding Front Sight Bead Ivory [11240-3565]1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Recknagel Fibre Optic Front Sight Bead 9.5mm [11024-4095]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Front Sight Bead Red [11444-0300]1 x ERATAC Backup Rear Sight for Picatinny [T0544-0355]1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Standard Trigger - Steel1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x K-80 Standard Trigger - Gold Plated1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]1 x Krieghoff Steel Middle Hanger (For Parcours)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x ERATAC Backup Front Sight for Picatinny, 1.35mm [T0543-0355]1 x Recknagel Grip Cap Compartment1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]
Manufacturers
Useful Information