Contessa Satin Chromed Picatinny Rail - Sako 85 Long (0 MOA) Adjustable

£148.61
20% VAT incl.


  • Model:PH14/C/0
Contessa Satin Chromed Picatinny Rail for Sako 85 Long
With 0 MOA
Primarily fits Sako Models: 75 / 85 but can also fit older models using the Sako tapered dovetail system too.
Fits Calibres: .300 Win Mag / .338 Win Mag / .375 H&H Mag / 7mm Rem Mag
Also the XL, Extra Long 85 Models: .338 Lap Mag, .416 Rigby, .450 Rigby, .500 Jeffrey
(Please always double check the action size as this is a guide)



Rail Length: - 170mm
Height (BH) - 12.5mm
Distance between bases - 87mm - 110mm
Weight: - 185g
Material: - Satin Finished Chromed Steel

Contents Supplied:
- 1 x Satin Chromed Steel Rail
- 1 x Satin Chromed Rear Base
- 1 x Satin Chromed Front Base
- 1 x Wrench

This Chromed Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The satin chrome finish has a matt finish to suit rifles with stainless barrels. A perfect alternative to the blued steel versions.

Distance Spacing: (distances between bases)
30mm (Dovetail Base) / 94mm / 30mm (Dovetail Base)

Fitting:
A common issue with the Sako rifles is that the taper on the rifle is not the same as the taper on the picatinny rail. Contessa have designed their rail to fit as accurately as possible, tested on a wide number of Sako 85 actions. We have discovered there are slight variations in the Sako rifle dovetails due to factory tolerances, so even just a 1/100 of a mm can mean a poor fit. A method we use to overcome this poor fit is to remove the recoil stud from the rail (This is usually glued in with thread locker by Contessa, you may need to heat the screw to release the bond). This should allow the rail to slide on further and tighter. If this doesn't overcome the problem, we do suggest to use Locktite where the rail dovetail surface contacts the rifle dovetail. This will ensure a solid hold. Bear in mind, any recoil actually pushes the rail forwards into the dovetail and recoil will not alone cause the rail to loosen.

* The older models of Sako with the tapered dovetail, even on the Sako 75, there are larger variations in the dovetail widths. So you may discover that the rail does not slide on fully flush with the back of the rifle. This again would require hand fitting to the rifle. If you need any advice on hand fitting please contact us.

Other Satin Chromed Models Available:
Sako 75/85 X-Short, 0 MOA
Sako 75/85 X-Short, 10 MOA
Sako 75/85 X-Short, 20 MOA
Sako 75/85 Short, 0 MOA
Sako 75/85 Short, 10 MOA
Sako 75/85 Short, 20 MOA
Sako 75/85 Medium, 0 MOA
Sako 75/85 Medium, 10 MOA
Sako 75/85 Medium, 20 MOA
Sako 75/85 Long, 0 MOA
Sako 75/85 Long, 10 MOA
Sako 75/85 Long, 20 MOA

This Steel Picatinny Rail is precision made by Contessa Alessandro & C. s.n.c. The part is precision made to fit the rifle with exact dovetail spacing to fit to the rifle with the supplied wrench. This full length rail has two dovetail clamping blocks which attach to the tapered dovetails either side of the ejection port on your Sako rifle.

The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Contessa Catalogue is available to download online now.
1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)3 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x EX Demo - Gerber Metolius Pocket Folder1 x Winchester 3" Folding Knife2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x Schmierfix Grease by Liqui Moly1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 10.3mm (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Anschütz Biathlon Harness1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Recknagel Replacement Polyform Lever [00088-5700]2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Navy Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)2 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Schultz & Larsen Torx Key for Scope Mounts1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff 28b Choke Wrench1 x Briley 20b Speed Wrench - For Krieghoff1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Krieghoff Front Sight Bead (Small)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x Krieghoff Choke Multi Wrench1 x Krieghoff .410g Choke Wrench1 x Krieghoff Stock Removal Wrench1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Krieghoff Front Sight Bead (Standard)1 x Krieghoff K80 Speed Wrench for KTW Chokes1 x Krieghoff 12b Choke Wrench2 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Gerber GDC Zip Blade1 x Ebony & Brass 20 Bore Snap Caps1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Jones Original Pad Adjuster1 x Krieghoff Factory Hanger Pin2 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Ex-Display Gerber GDC Zip Hex1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Spares Kit1 x Gerber Myth Series Fixed Saw1 x Gerber Basic Fixed Blade Serrated1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff "K" Denim Cap - Grey2 x VFG Magnetic Felt Clamps for Vices - 100mm1 x Krieghoff Safety Catch Locking Screw Wrench2 x Krieghoff Brass Front Sight Bead1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Jones Thru-the-Pad Adjuster1 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x ERATAC Bubble Level [T0940-0002]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)
Manufacturers
Useful Information