Schultz & Larsen T-Handle Wrench (4mm Hex)

£7.50
20% VAT incl.


  • Model:SL-TWRENCH
Schultz & Larsen T-Handle Wrench (4mm Hex)

For use with Schultz & Larsen rifles, including the Classic DL, Victory and Ambassador. The Wrench is use primarily to un-tighten the vital screws to remove and reattach the barrel.

There are two screws on the trigger mechanism plate to loosen. These are undone and removed, then trigger mechanism plate drops out to free the barrelled action. This is to be taken out from the top of the stock, once removed, there are two more screws which hold the barrel into the action. These need to be loosened with the T-Wrench also, but only by 1/2 to 3/4 turn, then out slides the barrel.

When reattaching the barrel. Slide the barrel back into the action ensuring the lug in the action slots fully into the barrel. Insert the bolt and close to guarantee the position is correct. Tighten the screws on the action gradually by alternating between the two until fully tightened. Once the barrel is attached, insert the barrelled action back into the stock, then attach the trigger mechanism plate back in place and tighten up the two screws (smaller of the two at the front). Do this alternatively until fully tightened.

Length: 140mm
Weight: 31 g
4mm Hex/Allen Wrench
2 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x VFG Complete Set for .1771 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Tikka T1 / T1X (10 MOA)3 x Contessa Picatinny Rail - Remington 700 Short Extended (0 MOA)2 x Briley 20b Speed Wrench - For Krieghoff1 x Schultz & Larsen Picatinny Rail for Classic DL (20 MOA)1 x Recknagel Weaver Bases - Schultz & Larsen [57080-3093]1 x Contessa Picatinny Rail - Anschutz 54/64 (10 MOA)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]2 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Recknagel SOB02 Silencer (Standard Thread)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Schultz & Larsen Take Down Rifle Case1 x Ex-Demo Teague Choke Tube, K-80 Parcours #3 (19)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Ex-Demo Teague Choke Tube, K-80 Parcours #2+ (15)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Picatinny Rail - Sako S20 (20 MOA)1 x Krieghoff Brass Mid Sight Bead
Manufacturers
Useful Information