Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail

£375.13
20% VAT incl.


  • Model:SBB06
Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail
Contessa Quick Release Mount for Blaser for Schmidt & Bender

Rail Length: - 111mm
Height (BH) - 12mm
Weight: - 230g
Code - SBB06
Fits Models: - R8, R93

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

The quick release mount, designed to fit the Schmidt & Bender Rail on various models of Schmidt & Bender. The Contessa mount has windage adjustment if required and is locked/released with a single side lever that works on both lugs at the same time. The quality and finish of the mount is extremely high. Return to zero is guaranteed.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system. To see the other available Contessa mounting parts - Click Here




The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
5 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus5 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)2 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings3 x Ziegler Quick Release Mount for Blaser - Picatinny Rail3 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)3 x Ziegler Quick Release Mount for Blaser - Zeiss Rail4 x Ziegler Quick Release Mount for Blaser - Swarovski Rail2 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Parker Hale Thread to 8-32 Thread Converter2 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)3 x Krieghoff HIVIZ Pro Sights4 x AimZonic Plus Camo Sound Moderator2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Bauer Outdoor 8x21 Binoculars1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff K-80 Sport Logo Cap Black & Red2 x Krieghoff "K" Mesh Cap - Black2 x Jones Original Pad Adjuster2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Jones Gun Nut Kit3 x Jones Thru-the-Pad Adjuster2 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Trigger Screw2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Krieghoff Brass Front Sight Bead1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)2 x Anschütz Biathlon Harness1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff "K" Denim Cap - Grey1 x Schultz & Larsen Take Down Rifle Case1 x Briley 20b Speed Wrench - For Krieghoff1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x WalkStool Spare Leg Joints1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x WalkStool Comfort 65 (65cm/26in)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x WalkStool Set of Spare Red Spring2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel SOB3D Silencer (ERA LOC)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Walkstool Steady1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x K-80 Standard Trigger - Steel1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint3 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff Navy Gun Slip2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Starkie Blue (A.K.A Smurf Poo)1 x Black Leather Shell/Cartridge Pouch1 x Custom Rifles of Great Britain by Bruce Potts1 x Black Barrel Case (83cm Internal)1 x Ebony & Brass 20 Bore Snap Caps1 x Winchester 3" Folding Knife2 x Krieghoff Woven Fabric Patch1 x Gerber Metolius Pocket Folder1 x Gerber Paraframe II Fine Edge Knife1 x Krieghoff 12b Choke Wrench1 x Krieghoff Brass Mid Sight Bead1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)2 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x K-80 Forward Position Trigger - Gold Titanium1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Complete Set for .1771 x VFG Pull Through Pocket Set for .22 Upwards1 x VFG Adaptor from M5 to 1/8" Aluminium1 x K-80 Forward Position Trigger - Gold Plated1 x VFG Magnetic Felt Clamps for Vices - 150mm1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat 04 [8332]1 x Krieghoff "K" Collectors Badge1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x Recknagel Sling Swivel Screw (ø¸ 3mm) [20205-0022]2 x Krieghoff "K" Denim Cap - Navy1 x Recknagel Leaf Sight 19mm [15235-3019]3 x AimZonic Compact Camo Sound Moderator1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Krieghoff "K" Logo Cap Navy & White1 x ERATAC Backup Front Sight for Picatinny, 1.8mm [T0542-0355]2 x Bauer ED 10x42 Binoculars1 x Bauer HD 8.5x50 Binoculars1 x Krieghoff Stock Removal Wrench1 x Krieghoff Achievement Badge 25 Straight1 x Krieghoff Front Sight Bead (Standard)1 x ERATAC UNI-Interface Docter Sight Adaptor [T0920-0005]1 x ERATAC Two-Piece Picatinny Rings (Nut)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Quick Release Picatinny Rail1 x Gerber Descent - Folding Knife1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail
£31,566.30
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Contessa Quick Release Mount (Picatinny) for ATN X-Sight II Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever) Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)