Schultz & Larsen Slide & Lock for Zeiss Rail, Med (11mm BH)

£210.00
20% VAT incl.

Available Options

  • Model:SL60ZR
Schultz & Larsen Slide & Lock Mounts for
Zeiss Rail - Medium (11mm Base Height)

45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process. Will fit Zeiss Scopes with the Zeiss Rail fitting.

Total Weight of Both Mounts - 122g
Base Height (BH) - 11mm
Code Ref: SL60ZR

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x MSA Sordin - Hygiene Kit - Foam Seals1 x ERATAC Bubble Level [T0940-0002]1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23115-5010]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]2 x ERATAC QD Sling Swivel - Loop Swivel [T0510-0001]2 x Recknagel Extended Rail Remington 700 Long [57250-0112]1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Black Barrel Case (83cm Internal)1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]2 x Krieghoff HIVIZ Pro Sights1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 6mm Stud1 x Black Leather Shell/Cartridge Pouch1 x Schultz & Larsen Professional Bipod by Spartan1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]3 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Detachable Sling Swivel 25.4mm Loop - 8mm Stud1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Recknagel 40mm Ring Components - 5mm BH1 x Recknagel 36mm Ring Components - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Anschütz Biathlon Harness1 x Briley 20b Speed Wrench - For Krieghoff1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]1 x Jones Original Pad Adjuster1 x Recknagel SOB3D Silencer (Standard Thread)1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x Jones Thru-the-Pad Adjuster1 x ERATAC ACI Bubble Level [T0940-0000]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu2 x Recknagel SECURA Safety for Remington 700 [30170-1200]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 56mm1 x Recknagel Grip Cap Compartment1 x Recknagel Picatinny Rail Antonio Zoli 1900, Alu [..0089]1 x Holex TORX Screwdriver set of 7 [00062-5057]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Recknagel SOB01 Silencer (Standard Thread)1 x Recknagel Picatinny Rail Anschutz 1780, Alu [..002B]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Picatinny Rail Browning A Bolt 3 Short, Alu [..002T]1 x Recknagel Steel Stock Trap Door1 x Recknagel Hood for Front Ramp [13020-1580]1 x Recknagel Picatinny Rail 204mm Blank, Steel [..0120]1 x Recknagel Picatinny Rail 200mm Blank No Slots, Steel [..0000]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x WalkStool Spare Leg Joints1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 62mm1 x Recknagel Grip Cap Skeleton Pointed [24060-0200]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Walkstool Steady1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Leaf Sight 19mm [15235-3019]1 x Recknagel Picatinny Rail Browning X Bolt Long, Alu [..011P]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Picatinny Rail 204mm Blank, Alu [..0120]1 x Recknagel SOB Silencer ERA LOC Muzzle Adaptor Wrench1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Recknagel SOB02 Silencer (Standard Thread)1 x WalkStool Set of Spare Red Spring1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Super Express 1 Leaf Sight [15400-3025]1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Fixed Standing Window Sight 10mm [15111-2010]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Recknagel Picatinny Rail Browning A Bolt 3 Long, Alu [..012T]1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Picatinny Rail Browning BAR, Steel [..0003]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]2 x Recknagel Safety for Mauser K98 [30100-5000]1 x WalkStool Comfort 65 (65cm/26in)1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel Super Express 2 Leaf Sight [15400-3036]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Adaptor for Thermal and Night Vision Devices - 30mm1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff Pro Choke Box1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Picatinny Rail - Sako 75/85 X-Short - Extended1 x Jones Gun Nut Kit
Manufacturers
Useful Information