Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Schultz & Larsen Professional Bipod by Spartan3 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Schmierfix Grease by Liqui Moly1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Recknagel 11mm Dovetail Ring Mounts 30mm [42230-0500]2 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)2 x Recknagel 11mm Dovetail to Picatinny Rail Adaptor [..1011]1 x Schultz & Larsen Picatinny Rail for Victory (0 MOA)2 x Krieghoff HIVIZ Pro Sights2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights3 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Anschütz Biathlon Harness1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Ebony & Brass 20 Bore Snap Caps2 x Walkstool Steady1 x Krieghoff Navy Gun Slip1 x Custom Rifles of Great Britain by Bruce Potts1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Black Barrel Case (83cm Internal)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x WalkStool Spare Leg Joints1 x Schultz & Larsen Take Down Rifle Case1 x WalkStool Comfort 65 (65cm/26in)1 x Black Leather Shell/Cartridge Pouch2 x VFG Magnetic Felt Clamps for Vices - 150mm2 x Teague Precision Choke Key1 x WalkStool Set of Spare Red Spring1 x Recknagel Polyform Lever & Nut for Picatinny Mounts2 x AimZonic Plus Camo Sound Moderator1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Jones Original Pad Adjuster1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Jones Thru-the-Pad Adjuster1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Bauer HD Series 8x25 Binoculars1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x AimZonic Compact Camo Sound Moderator1 x Bauer Outdoor 8x21 Binoculars2 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Recknagel SOB3D Silencer (Standard Thread)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel SOB3D Silencer (ERA LOC)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Krieghoff Brass Mid Sight Bead1 x Krieghoff Front Sight Bead (Small)2 x Krieghoff Front Sight Bead (Standard)1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Krieghoff Factory Hanger Pin1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Gerber Gator Combo Replacement Saw1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x Gerber Myth Series Fixed Saw1 x Recknagel Ring Base for Rear Sight [16550-0185]1 x Recknagel SECURA Sling Swivel - 25.4mm Wide - 6mm [22009-3000]1 x Recknagel Grip Cap Flat with Small Edge [24020-0400]1 x Recknagel QD Sling Swivel Socket - Slim Forearm [23100-5010]1 x Recknagel Steel Stock Trap Door1 x Recknagel Grip Cap Flat with Large Edge [24020-0200]1 x Recknagel QD Sling Swivel Socket - Fixed Step, Flat [..-1010]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Barrel Banded Front Ramp [12530-....]1 x Recknagel 16mm Dovetail Ring Mounts 30mm1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Extended Rail Remington 700 Short [57250-0012]1 x Recknagel Fibre Optic Front Sight Bead 8.5mm [11022-2585]1 x Recknagel Picatinny Rail Browning X Bolt Long, Alu [..011P]1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Recknagel Detachable Magnum Sling Swivel 25.4mm Loop - 8mm Stud1 x Recknagel Grip Cap Full Domed [24000-0100]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x ERATAC Picatinny Extended Riser Mount (Nut)1 x Recknagel QD Sling Swivel Socket - Screw-on [23225-0000]1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Tactical One Piece QD Picatinny Ring Mount - 40mm1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)2 x Ex-Display Gerber GDC Zip Hex1 x Ex-Demo K-80 Steel 12b Hanger #61 x Krieghoff Comb Wrench (T-Handle)1 x Gerber Powerframe Knife1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel 30mm Ring Components - 5mm BH1 x Contessa Picatinny Rail - Howa 1500 Short (0 MOA)1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Recknagel One Piece QD Tip-off Picatinny Ring Mount [57530-5110]1 x ERATAC ZFIX Telescopic Sight Alignment Aid [T0810-0000]1 x Recknagel One Piece Tip-off Picatinny Ring Mount [57030-5110]1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel 11mm Dovetail Mount for Aimpoint Micro [47620-0123]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel Brass Front Sight Bead 2.5mm [11400-0250]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Gerber Basic Fixed Blade Serrated1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Gerber Paraframe II Fine Edge Knife1 x LED Lenser Intelligent Filter Set with Holster1 x Silva Commute Bike Light - Pink1 x LED Lenser Car Charger1 x Ex-Demo K-80 Steel 12b Choke Tube #3 (036)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)
Manufacturers
Useful Information