Schultz & Larsen Scope Rings 30mm, Med/High (13mm BH)

£185.00
20% VAT incl.

Available Options

  • Model:SL6025
Schultz & Larsen Scope Rings
30mm - Medium/High (13mm Base Height)


Works with a 56mm Objective: If you have a scope with a 56mm objective lens, check whether the outer measurement is 62mm or smaller. If it is, then these rings will work, with an extremely low mounting height.

Machined out of a single block of high grade steel, gas nitrated and blued, the Schultz & Larsen "Slide & Lock" scope mounts are almost certainly the lightest all-steel scope mount made anywhere in the World. Incredibly strong and virtually rust proof, due to the special hardening process, these mounts are available in a range of heights and diameters.

Total Weight of Both Rings - 109g
Ring Diameter - 30mm
Base Height (BH) - 13mm
Code Ref: SL6025

Version Types:
The mounting dimensions on the Classic and Victory Actions are slightly different to the Legacy Short Action. The Slide & Lock Mounts sit slightly lower on the Legacy Action than then do on the Classic and Victory, meaning the cross-bolt, used to fix the mounts to the action, contacts on the top of the Legacy Action. To overcome this, a narrower diameter cross bolt is used for the Legacy to ensure it does not contact the action when fitting. If you have a Legacy, please select the correct Version above.

The key Torx 15 wrench for tightening is included. The mounts attach with Torx cross bolt and, for convenience, these can be changed to QD levers.

A unique feature of the mount is the rapid change Summer or Winter positions. On both Classic and Victory models there are two locating positions for the mount (The Legacy has only one due to the shortness of the action). The forward one is for Summer use and the rear for Winter. This moves the scope about 1/2" and compensates for the differing thickness of clothing. The scope can be slackened and repositioned without the need to remount. You should fire a couple of test rounds after moving to check zero but due to the exact alignment of both positions with the bore the zero will move only slightly if at all. Certainly less than 1 MOA (about 1" at 100 yards).

1 x Recknagel Picatinny Rail Remington 700 L, Alu [..0112]1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Gun Slip3 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights3 x Krieghoff HIVIZ Pro Sights2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen T-Handle Wrench (4mm Hex)1 x Schmierfix Grease by Liqui Moly1 x Krieghoff Woven Fabric Patch1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Krieghoff "K" Denim Cap - Grey2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Krieghoff Spares Kit1 x Krieghoff Pro Choke Box1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Contessa Picatinny Rail - Sako 75/85 Medium (0 MOA) Adjustable1 x Contessa Picatinny Rail - Sako 75/85 Medium (10 MOA) Adjustable1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Sight Bead Blanking Screw1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Recknagel Picatinny Bases - Schultz & Larsen1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Jones Gun Nut Kit1 x Contessa Picatinny Rail - Sako S20 (0 MOA) - Extended1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x AimZonic Compact Camo Sound Moderator1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Recknagel SOB3D Silencer (ERA LOC)1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Recknagel SOB3D Silencer (Standard Thread)1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Krieghoff Stock Removal Wrench1 x ERATAC ACI Bubble Level [T0940-0000]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Adaptor for VFG Rods Brass1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Complete Set for .1771 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)1 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor1 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)
Manufacturers
Useful Information