Contessa QD Rear Extended Picatinny Rail Mount for Blaser

£375.13
20% VAT incl.


  • Model:SBB03/R
Contessa Rear Extended Picatinny Rail for Blaser
Quick Release (QD) Rail Mount including Rear Picatinny Rail for Blaser


Rail Length: 190mm
Height without Rail (BH): 12.5mm
Height with Rail (BH): 19.5mm
Extends Backwards - 98mm Back past the rear rifle clamp notch
Weight: 282g
Fits Models: R8, R93

Contents Supplied:
- 1 x Quick Release Blaser Base (SBB00)
- 1 x Forward Extended Picatinny Rail (EBB02-REAR)
- Wrenches
- Spare Screw

Materials:
- Non Moving Parts: Hard Anodised Light Alloy called Ergal 7075
- Moving Parts: Hardened Compound Steel

These scope mounts are designed specifically for Blaser by Contessa Alessandro, Italy. The mounts fit the Blaser R8 & R93 bolt action rifles.

This quick release mount is an extended Picatinny Rail, suitable for night vision, allowing greater flexibility in eye relief position. This mount is supplied with a quick release base with ONLY THE REAR EXTENDED RAIL, that extends backwards towards the eye. Simple single release lever and high quality with guaranteed return to zero.

Simple to install at home with the supplied fitting tools. For additional instructions, view the Contessa Adjustment Screw Instructions for Blaser Mounts Here.

Other Blaser Mounts by Contessa:
Contessa Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 0 MOA,
Contessa Extended Picatinny Rail, 20 MOA,
Contessa Quick Release Mount for Blaser with Rings,
Contessa Quick Release Mount for Blaser with Forward Extended Picatinny Rail
Contessa Quick Release Mount for Blaser for Zeiss Rail
Contessa Quick Release Mount for Blaser for Swarovski Rail

This QD system allows you to interchange multiple scopes on a single rifle, and even change a single scope to different rifles in seconds using the Contessa system.



The Contessa Catalogue has the full range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.



You might also like...

2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x EX Demo - Gerber Metolius Pocket Folder1 x Winchester 3" Folding Knife2 x Krieghoff Trigger Screw3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)3 x Krieghoff HIVIZ Pro Sights2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Anschütz Biathlon Harness1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable2 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x VFG Barrel Cleaning Felts for 6mm (Box of 50)2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x VFG Pull Through Pocket Set for .22 Upwards1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud2 x Krieghoff Brass Front Sight Bead1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Krieghoff Woven Fabric Patch1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff Factory Hanger Pin2 x Krieghoff 12b Choke Wrench1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x ERATAC Bubble Level [T0940-0002]1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)1 x Ebony & Brass 20 Bore Snap Caps2 x Jones Gun Nut Kit2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Starkie Blue (A.K.A Smurf Poo)2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Jones Original Pad Adjuster1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Bauer Outdoor 8x21 Binoculars1 x WalkStool Spare Leg Joints1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x AG3 / 392A Alkaline Batteries (10 Pack)1 x Walkstool Steady1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff "K" Mesh Cap - Black1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x Black Leather Shell/Cartridge Pouch1 x MSA Sordin - Hygiene Kit - Foam Seals1 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Barrel Cleaning Felts for 7mm (Box of 500)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Adaptor for VFG Rods Brass1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Barrel Cleaning Felts for 8.5mm (Box of 50)1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)1 x VFG Adaptor for VFG Rods (Spare)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x Krieghoff Navy Gun Slip1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)2 x Krieghoff Stock Removal Wrench2 x Krieghoff Comb Wrench (T-Handle)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Intensive Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Jones Thru-the-Pad Adjuster2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)1 x Black Barrel Case (83cm Internal)1 x Schmierfix Grease by Liqui Moly1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG Magnetic Felt Clamps for Vices - 125mm1 x Teague Precision Choke Key1 x K-80 Forward Position Trigger - Gold Plated1 x Krieghoff Front Sight Bead (Standard)1 x K-80 Standard Trigger - Black Titanium1 x Schultz & Larsen Superdome Moderator (Over Barrel)1 x Recknagel SOB02 Silencer (Standard Thread)1 x Schultz & Larsen Venom Moderator (Muzzle Mounted)1 x Schultz & Larsen Superdome Moderator (Muzzle Mounted)1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Spare Ring-to-Base Screws
Manufacturers
Useful Information