K-80 Standard Trigger - Steel

£110.00
20% VAT incl.


  • Model:TRIG-NS


This Trigger blade fits all new model K-80 guns. It is suitable for K-80 owners with a forward position blade fitted who need the trigger to sit further back. The Trigger blade fits all new model K-80 guns that have the trigger blade attached on a T-slot rail. Earlier guns had a dovetail. If you wish to fit a new trigger on an earlier gun then you will also need a trigger upgrade. This can be done in our Krieghoff Service facility. Normally we recommend that you send the receiver of your gun to have the trigger fitted. It is possible to fit the blade yourself but please note the instructions you can read by reading the installation Procedure.

Fitting:

The K80 trigger blade is adjustable for position along a slide. There are two set screws on the underside of the trigger blade. The screw socket takes a 1.27mm wrench, 0.050" or 1/20th inch imperial. Use a Krieghoff Trigger/Selector Wrench. The rearmost screw locks the blade onto the slide whilst the front screw locks the barrel selector positioned immediately in front of the trigger blade. There are two trigger blade types, standard position and forward position. The standard blade has both screws in front of the curved blade whilst the forward position trigger has one screw in front and one directly behind the blade. Function of the two screws is the same.

To move the trigger blade, slacken the rear screw but note that the front screw, if locked, will also lock the trigger blade. The front screw has to be far enough out to allow the blade to slide so if it will not move try backing that screw out some more. Occasionally, the blade will be stuck on the slide but is easily freed with a nylon drift. Make sure both screws are free before tapping the blade with anything. Once in position, tighten the rearmost screw to lock the blade on the slide.

To lock the selector, tighten the front screw until the selector cannot be switched left to right. To release the selector, simply slacken that screw off again.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.


Watch the Trigger Replacement Instructional Video here:



You might also like...

1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x WalkStool Spare Leg Joints1 x WalkStool Set of Spare Red Spring1 x WalkStool Comfort 65 (65cm/26in)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Schultz & Larsen Take Down Rifle Case1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Walkstool Steady1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x K-80 Barrel Weight Balance System1 x Jones Thru-the-Pad Adjuster1 x Krieghoff Stock Removal Wrench1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Comb Wrench (T-Handle)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Schultz & Larsen Professional Bipod by Spartan1 x Jones Gun Nut Kit1 x K-80 Stock Weight for Balance System1 x Anschütz Biathlon Harness1 x Jones Original Pad Adjuster1 x Bauer Outdoor 8x21 Binoculars1 x Bauer HD Series 8x25 Binoculars1 x Bauer Outdoor 10x25 Binoculars1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x K-80 Standard Trigger - Steel
Manufacturers
Useful Information