K-80 Standard Trigger - Steel

£110.00
20% VAT incl.


  • Model:TRIG-NS


This Trigger blade fits all new model K-80 guns. It is suitable for K-80 owners with a forward position blade fitted who need the trigger to sit further back. The Trigger blade fits all new model K-80 guns that have the trigger blade attached on a T-slot rail. Earlier guns had a dovetail. If you wish to fit a new trigger on an earlier gun then you will also need a trigger upgrade. This can be done in our Krieghoff Service facility. Normally we recommend that you send the receiver of your gun to have the trigger fitted. It is possible to fit the blade yourself but please note the instructions you can read by reading the installation Procedure.

Fitting:

The K80 trigger blade is adjustable for position along a slide. There are two set screws on the underside of the trigger blade. The screw socket takes a 1.27mm wrench, 0.050" or 1/20th inch imperial. Use a Krieghoff Trigger/Selector Wrench. The rearmost screw locks the blade onto the slide whilst the front screw locks the barrel selector positioned immediately in front of the trigger blade. There are two trigger blade types, standard position and forward position. The standard blade has both screws in front of the curved blade whilst the forward position trigger has one screw in front and one directly behind the blade. Function of the two screws is the same.

To move the trigger blade, slacken the rear screw but note that the front screw, if locked, will also lock the trigger blade. The front screw has to be far enough out to allow the blade to slide so if it will not move try backing that screw out some more. Occasionally, the blade will be stuck on the slide but is easily freed with a nylon drift. Make sure both screws are free before tapping the blade with anything. Once in position, tighten the rearmost screw to lock the blade on the slide.

To lock the selector, tighten the front screw until the selector cannot be switched left to right. To release the selector, simply slacken that screw off again.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.


Watch the Trigger Replacement Instructional Video here:



You might also like...

1 x Recknagel Front Sight Bead Red [11444-0300]2 x Krieghoff 28b Choke Wrench2 x Krieghoff Pro Choke Box2 x Krieghoff 12b Choke Wrench1 x Teague Precision Choke Key2 x Briley T Wrench for K-80 Parcours Briley Chokes2 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes3 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes2 x Krieghoff Trigger & Selector Locking Wrench2 x Krieghoff Safety Catch Locking Screw Wrench1 x Krieghoff .410g Choke Wrench1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes2 x Krieghoff K80 Speed Wrench for Factory Chokes2 x Krieghoff Choke Multi Wrench1 x Krieghoff K80 Speed Wrench for KTW Chokes2 x K-80 Stock Weight for Balance System2 x Krieghoff C-Clips (E-Clips)1 x Krieghoff Stock Removal Wrench1 x Krieghoff Ejector Ball and Spring1 x Krieghoff Sight Bead Blanking Screw1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff Spares Kit1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Factory Hanger Pin1 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Trap Special / Pro Rib Wheel Locking Wrench1 x Krieghoff Comb Wrench (T-Handle)2 x Krieghoff HIVIZ Pro Sights1 x Krieghoff Front Sight Bead (Small)1 x Krieghoff Front Sight Bead (Standard)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x K-80 Barrel Weight Balance System1 x Krieghoff Brass Mid Sight Bead1 x Briley 20b Speed Wrench - For Krieghoff1 x Krieghoff Trigger Screw1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Standard Trigger - Gold Plated1 x K-80 Standard Trigger - Steel1 x K-80 Standard Trigger - Black Titanium1 x K-80 Forward Position Trigger - Titanium
Manufacturers
Useful Information