VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)

£12.47
20% VAT incl.


  • Model:332001
VFG Barrel Intensive Cleaning Felts for 6mm
Code: (66827) 332001


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .243 calibres.

The 6 mm felts are recommended for the following calibres: .243 Win., 6,35 mm, 22-250
See which Felts suit your Calibre >>>

Supplied as small box containing:
50 intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) N/A
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]3 x Recknagel Weaver Bases - Browning Acera [..-3077]2 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]2 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]2 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)3 x Krieghoff Brass Front Sight Bead2 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Recknagel Detachable Sling Swivel with Nut 25.4mm Loop, 8mm Stud1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Ziegler Quick Release Mount for Blaser - 30mm Rings3 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail2 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)3 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Spare Ring-to-Base Screws2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Krieghoff HIVIZ Pro Sights2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Krieghoff Front Sight Bead (Small)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)1 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x ERATAC ACI Bubble Level [T0940-0000]2 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Anschütz Biathlon Harness1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff "K" Denim Cap - Grey1 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Schmierfix Grease by Liqui Moly1 x K-80 Stock Weight for Balance System1 x Krieghoff Factory Hanger Pin1 x Krieghoff Sight Bead Blanking Screw1 x Krieghoff 12b Choke Wrench2 x Recknagel Weaver Bases - Sako A7 [57080-3020]1 x Recknagel Weaver Bases - Mauser M12 [..-302L]2 x Recknagel Weaver Bases - Savage (Flat Back) [57080-3035]2 x Recknagel Weaver Bases - Steyr-Mannlicher M [..-3051]2 x Recknagel Weaver Bases - Heym SR 21 [57080-3022]1 x Recknagel Weaver Bases - Schultz & Larsen [57080-3093]1 x Recknagel Weaver Bases - Steyr-Mannlicher [57080-3088]3 x Recknagel Weaver Bases - Krico 600/700/900/902 [.3006]1 x Recknagel Weaver Bases - Savage (Round Back) [57080-3093]1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)2 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Recknagel Weaver Bases - Heym SR 40 [57080-3041]1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)
Manufacturers
Useful Information