VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)

£12.47
20% VAT incl.


  • Model:332001
VFG Barrel Intensive Cleaning Felts for 6mm
Code: (66827) 332001


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel. Ideal for .243 calibres.

The 6 mm felts are recommended for the following calibres: .243 Win., 6,35 mm, 22-250
See which Felts suit your Calibre >>>

Supplied as small box containing:
50 intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) N/A
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Krieghoff 12b Choke Wrench1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Krieghoff Factory Hanger Pin1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Krieghoff Trigger Screw1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Krieghoff Navy Gun Slip1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Picatinny Rail Krico 700/900/902*, Alu [..0006]
Manufacturers
Useful Information