VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)

£8.74
20% VAT incl.


  • Model:331999
VFG Barrel Intensive Cleaning Felts for .22
Code: (66817) 331999


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. The Intensive felt wads are embedded with aggressive/coarse phosphor bronze fibres for proper cleaning that will not damage a steel airgun barrel

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing:
80 Intensive felt screw-on pellets

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video



You might also like...

2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)3 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Parker Hale Thread to 8-32 Thread Converter2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Krieghoff Woven Fabric Patch1 x Schmierfix Grease by Liqui Moly1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Recknagel Detachable Sling Swivel with Nut 20mm Loop, 8mm Stud1 x Krieghoff "K" Denim Cap - Grey1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Krieghoff Navy Canvas Gun Slip2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Pull Through Pocket Set for .22 Upwards1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG Barrel Cleaning Felts for 9.3mm (Box of 500)1 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)2 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Contessa Quick Release Mount for Zeiss Rail1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Krieghoff Trigger Screw1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Krieghoff Pro Choke Box1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Zeiss Rail 70º Components - 4mm BH1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Krieghoff Spares Kit1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Recknagel Blank 12mm Eurorail - 150mm1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Contessa Spare Ring-to-Base Screws1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x K-80 Stock Weight for Balance System
Manufacturers
Useful Information