VFG Barrel Cleaning Felts for .22 (Box of 80)

£7.35
20% VAT incl.


  • Model:331881
VFG Barrel Cleaning Felts for .22
Code: (66813) 331881


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing: 80 felt screw-on felts
(Also available: .22 felts - box of 500, for extensive usage and better value)

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Contessa Picatinny Rail - CZ 452 / 455 (20 MOA)3 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)2 x Contessa Quick Release Mount for Zeiss Rail1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)3 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)3 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail3 x Recknagel Zeiss Rail 45º Components - 6mm BH3 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)4 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Contessa Picatinny Rail - CZ 550 Magnum (0 MOA)2 x Contessa One Piece QD Picatinny Mount for Zeiss Rail5 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint3 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Krieghoff Navy Canvas Gun Slip1 x Recknagel Zeiss Rail 70º Components - 4mm BH3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Contessa Picatinny Rail - Browning A Bolt 1 Short (0 MOA)3 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]3 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Krieghoff HIVIZ Pro Sights2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Ziegler Quick Release Mount for Blaser - 30mm Rings2 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Blaser)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser2 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x ERATAC ACI Bubble Level [T0940-0000]3 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)2 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Parker Hale Thread to 8-32 Thread Converter1 x Krieghoff Brass Front Sight Bead2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x ERATAC ACI Elevation Turret [T0941-0000]1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]2 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight2 x Contessa QD Mount for Blaser for ATN X-Sight II2 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser3 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Krieghoff Front Sight Bead (Small)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Recknagel Weaver Bases - Browning Acera [..-3077]2 x Krieghoff Spares Kit1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning Eurobolt [..-3078]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Krieghoff Trigger Screw1 x Krieghoff Pro Choke Box1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x ERATAC Offset UNI-Interface Picatinny Rail [T0913-0000]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Contessa Spare Ring-to-Base Screws1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Schultz & Larsen Torx Key for Scope Mounts1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Contessa Spare Screw for Sako 75/85 Rails1 x Schultz & Larsen Professional Bipod by Spartan1 x Anschütz Biathlon Harness1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)2 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes1 x Krieghoff K-Diamond Beanie - Navy2 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Briley 20b Speed Wrench - For Krieghoff1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa One Piece QD Extended Picatinny Rail Mount1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Rizzini Euro Rail Base for Quick Release Mount1 x Schmierfix Grease by Liqui Moly1 x Contessa Browning European Euro Rail for Quick Release Mount1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa QD Low Mount for Yukon Photon Night Vision (Picatinny)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (10 MOA)1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Black Barrel Case (83cm Internal)1 x Contessa Blued Steel Tactical Picatinny Rings - 30mm (10mm BH)1 x Contessa Satin Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Recknagel Picatinny Rail Browning X Bolt Long, 20 MOA, Alu1 x Custom Rifles of Great Britain by Bruce Potts1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (20 MOA)1 x Recknagel Picatinny Rail Steyr-Mannlicher S, 0 MOA, Alu [..0388]1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Shiny Chromed Picatinny Rail - Howa Long (0 MOA)1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x Contessa Picatinny Rail - Browning X Bolt Long (0 MOA) Extended1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (20 MOA) Adjustable1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Bettinsoli Euro Rail Base for Quick Release Mount1 x Recknagel Picatinny Rail Browning X Bolt Short, 20 MOA, Alu1 x Contessa Sako 75/85 Medium Euro Rail for Quick Release Mount1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa Lightweight Alu Picatinny Rings - 34mm (8mm BH)
Manufacturers
Useful Information