VFG Barrel Cleaning Felts for .22 (Box of 80)

£7.35
20% VAT incl.


  • Model:331881
VFG Barrel Cleaning Felts for .22
Code: (66813) 331881


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean.

The .22 felts are recommended for the following calibres: .22 lfb, .22 kurz, .22 WMR, .22 Hornet, .222 Rem., .223, .224, 5,6.
See which Felts suit your Calibre >>>

Supplied as small box containing: 80 felt screw-on felts
(Also available: .22 felts - box of 500, for extensive usage and better value)

Instructions for Use:
1. Take Adapter and screw this onto VFG Cleaning rod No. 66889 (900 mm Long).
2. Screw a VFG felt cleaner onto the coarse thread of the adapter.
3. Place a second VFG felt cleaner onto the metric thread (used together a screw for the cleaning of shotguns)
4. Push the adapter with the two felts carefully through the barrel from the breech end and out of the muzzle. The special felts compress into the rifling and follow it exactly. The forward pellet removes the fouling out of the muzzle and by pulling back the rod, the dirty pellet drops off the metric thread, leaving the screwed pellet to polish the barrel by pushing the rod backwards and forwards.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner onto the adapter, soak this thoroughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. To remove the oil repeat steps 1 - 4.
7. In order to remove rubbed off metal, please use Super Intensive Cleaners.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

1 x Jones Thru-the-Pad Adjuster1 x Jones Gun Nut Kit1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Contessa 25.4mm Rings for Simple Black - 2.5mm (Low)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)2 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff Brass Front Sight Bead1 x Krieghoff Pro Choke Box1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa 30mm Rings for Simple Black - 7.5mm (High)1 x Contessa 36mm Rings for Simple Black - 5.0mm (Low)1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa 30mm Rings for Simple Black - 2.5mm (Low)1 x Contessa Sako 75/85 Long Euro Rail for Quick Release Mount1 x WalkStool Set of Spare Red Spring1 x Contessa CZ 550 Euro Rail for Quick Release Mount1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Contessa 6mm Rib Blank Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Contessa Sauer 202 Standard Euro Rail Base for QR Mount1 x Contessa Spare Ring-to-Base Screws1 x Contessa Quick Release Mount for Zeiss Rail1 x Contessa Spare Screw for Sako 75/85 Rails1 x Contessa Quick Release Mount Base for Bolt Action (Base Only)1 x Contessa Merkel Helix Euro Rail for Quick Release Mount1 x Contessa Quick Release Mount (Euro Rail) for ATN X-Sight II1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x WalkStool Comfort 65 (65cm/26in)1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Contessa Browning X-Bolt L Euro Rail Base for QR Mount1 x Contessa QD Both Extended Picatinny Rails Mount for Blaser1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)1 x Walkstool Steady1 x Bauer Outdoor 8x21 Binoculars1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Contessa Spare Blaser Mounting Clamp Parts1 x Contessa Quick Release Picatinny Rail1 x Contessa Quick Release Mount for Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Contessa Browning X-Bolt S Euro Rail Base for QR Mount1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x AimZonic Plus Camo Sound Moderator1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Contessa Remington 700 Short Euro Rail Base for QR Mount1 x Contessa Sauer 202 Magnum Euro Rail Base for QR Mounts1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Recknagel SOB3D Silencer (ERA LOC)1 x Contessa Picatinny Rail - Sako S20 (0 MOA)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (0 MOA)1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (20 MOA)1 x Contessa Shiny Chromed Picatinny Rail - Howa Short (10 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (20 MOA)1 x Krieghoff HIVIZ Pro Sights2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Long (10 MOA)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (10 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 40mm (8mm BH)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Tactical One Piece QD Picatinny Ring Mount 30mm, 0 MOA1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Contessa Picatinny Rail - Anschutz 54/64 (30 MOA)1 x Contessa Satin Chromed Steel Picatinny Rings - 30mm (8mm BH)1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa QD Mount for ATN 4K Night Vision (Picatinny)1 x Contessa Blued Steel Picatinny Rings - 35mm (8mm BH)1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Contessa Satin Chromed Picatinny Rail - Sako 85 Short (0 MOA) Adjustable1 x Contessa One Piece QD Picatinny Mount for Swarovski Rail1 x Recknagel Weaver Bases - Winc. 70 Mag. <1964 [.-3095]1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA)1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Tactical One Piece QD Picatinny Ring Mount 40mm, 0 MOA1 x Contessa Satin Chromed Picatinny Rail - Sako 85 XS (0 MOA)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Satin Chromed Steel Picatinny QD Rings - 30mm (8mm BH)1 x Contessa Shiny Chromed Steel Picatinny Rings - 1" (8mm BH)1 x Recknagel SOB3D Silencer (Standard Thread)1 x Contessa Picatinny Rail - Benelli ARGO (0 MOA)1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x ERATAC Bubble Level [T0940-0002]1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa Picatinny Rail - Browning A Bolt 1 Long (0 MOA) Extended1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Parker Hale Thread to 8-32 Thread Converter1 x Contessa Shiny Chromed Picatinny Rail - Remington 700 Long (0 MO1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x Contessa Picatinny Rail - Anschutz 54 Only (10 MOA)
Manufacturers
Useful Information