VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)

£7.24
20% VAT incl.


  • Model:332066
VFG Barrel Cleaning Felts for 4-4.5mm
Code: (66800) 332066


These small felt screw-on pellets, which are calibre specific are used with the VFG Cleaning Rod to clean your barrel. The felts screw onto the cleaning rod tip and then passed down the barrel to give a smooth and effective clean. Ideal for .17 calibres

The 4-4.5 mm felts are recommended for the following calibres: 4 mm M 20, 4 mm, .17 Rem, 177 HMR
See which Felts suit your Calibre >>>

Supplied as small box containing: 100 felt screw-on pellets

To be used with VFG Cleaning Rod for 4-4.5mm Calibres.

Instructions for Use:
1. Take Adapter No. 66803 and screw this onto VFG Cleaning rod No. 66801 (740 mm Long) or 66802 (300 mm Short).
2. For the preliminary cleaning operation screw a VFG Super Intensive Cleaner onto the adapter.
3. Slowly push a VFG Super Intensive Cleaner through the barrel from the breech. When doing so, the special felt presses itself firmly into the grooves and follows the rifling. Repeat this procedure as often as is necessary.
4. For the final cleaning operation use normal VFG Rifle Cleaner No. 66800.
5. If the barrel is to be oiled, screw VFG Rifle Cleaner No. 66800 onto the adapter, soak this thoughly with weapon oil (Ballistol or Ustanol) and repeatedly move it back and forth in the barrel.
6. Perform the de-oiling of the barrel with normal VFG Rifle Cleaner No. 66800.

Make sure that the barrel of your weapon is free after each cleaning operation.

See the VFG Barrel Cleaning Catalogue >>>

Also Available:
Small Box Quantities (Standard) Small Box Quantities (Intensive) Large Pack Quantities
4 - 4.5mm Standard Felts (100) 4 - 4.5mm Intensive Felts (100) 4 - 4.5mm Standard Felts (500)
.22 Standard Felts (80) .22 Intensive Felts (80) .22 Standard Felts (500)
6mm Standard Felts (50) 6mm Intensive Felts (50) 6mm Standard Felts (500)
6.5mm Standard Felts (50) 6.5mm Intensive Felts (50) 6.5mm Standard Felts (500)
7mm Standard Felts (50) 7mm Intensive Felts (50) 7mm Standard Felts (500)
7.5mm Standard Felts (50) 7.5mm Intensive Felts (50) 7.5mm Standard Felts (500)
8mm Standard Felts (50) 8mm Intensive Felts (50) 8mm Standard Felts (500)
9mm Standard Felts (40) 9mm Intensive Felts (40) 9mm Standard Felts (500)
9.3mm Standard Felts (40) 9.3mm Intensive Felts (40) 9.3mm Standard Felts (500)
.375 Standard Felts (40) .375 Intensive Felts (40) .375 Standard Felts (500)
10.3mm Standard Felts (30) 10.3mm Intensive Felts (30) N/A
.44 Standard Felts (30) .44 Intensive Felts (30) .44 Standard Felts (250)
.45 Standard Felts (30) .45 Intensive Felts (30) N/A


Features & Cleaning Instructions Video

2 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser3 x Ziegler Quick Release Mount for Blaser - 34mm Rings2 x Contessa QD Mount for Blaser for ATN X-Sight II2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)2 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)2 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision2 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser3 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail2 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)2 x Ziegler Quick Release Mount for Blaser - 1 inch Rings3 x Contessa QD Forward Extended Picatinny Rail Mount for Blaser3 x Contessa QD Both Extended Picatinny Rails Mount for Blaser4 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)2 x Contessa QD Extra Extended Picatinny & Lateral Rails - Blaser3 x Contessa QD Mount for ATN 4K Night Vision (Blaser)2 x Contessa QD Extra Extended Rear Picatinny Rail - Blaser1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa Picatinny Rail - Sauer 100/101 (0 MOA) Extended2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x Contessa CZ 527 Euro Rail for Quick Release Mount1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)2 x Krieghoff Brass Front Sight Bead2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Contessa Quick Release Mount (Picatinny) for ATN X-Sight II1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Recknagel Weaver Bases - Mauser M12 [..-302L]1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Contessa Quick Release Mount for Zeiss Rail1 x Schultz & Larsen Professional Bipod by Spartan1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount3 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Recknagel Zeiss Rail 70º Components - 4mm BH2 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Zeiss Rail 45º Components - 6mm BH1 x Recknagel One Piece Tip-off Mounts for Swarovski [57553-0110]1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Recknagel Weaver Bases - Browning Mauser [..-3057]1 x Recknagel Weaver Bases - Anschutz 1780 [57080-302B]1 x Recknagel Weaver Bases - Browning A-Bolt I/II [57080-3020]1 x Recknagel Weaver Bases - Haenel Jager 10 [..-302C]1 x Recknagel Weaver Bases - FFV Carl Gustaf 4000 [.-3042]1 x Recknagel Weaver Bases - Browning BAR/BLR [57080-3003]1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Recknagel Weaver Bases - FFV Carl Gustaf 2000 [.-3028]1 x Recknagel Weaver Bases - Beretta 501 S [57080-3026]1 x Recknagel Weaver Bases - Chapuis Express [57080-3029]1 x Recknagel Weaver Bases - Browning BBR [57080-3004]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Recknagel Weaver Bases - Browning Acera [..-3077]1 x Recknagel Weaver Bases - Browning European [..-3056]1 x Recknagel Weaver Bases - Benelli ARGO [57080-3076]1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Recknagel Picatinny Rail Mauser M18, Alu [..002X]1 x Recknagel Picatinny Rail Sauer 202 Std, Alu [..0080]1 x Recknagel Weaver Bases - Sauer 202 [57080-3080]1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC ACI Elevation Turret [T0941-0000]2 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x ERATAC ACI Bubble Level [T0940-0000]1 x ERATAC 56mm Ring with UNI-Interface [03680-5757]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Contessa QD Mount for HIK-Micro Panther (Picatinny)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Anschütz Biathlon Harness1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x Schultz & Larsen Torx Key for Scope Mounts1 x Contessa Spare Screw M10 for Anschutz/CZ Rails1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Contessa Spare Ring-to-Base Screws1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Contessa Picatinny Rail - Ruger American (0 MOA)1 x Contessa Picatinny Rail - Tikka M690/M695 (0 MOA)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Navy Canvas Gun Slip1 x Krieghoff Pro Choke Box1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Trigger Screw1 x Krieghoff Spares Kit1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Picatinny Rail - CZ 452 / 455 (0 MOA)1 x Contessa Picatinny Rail - Sabatti Rover Short (0 MOA)1 x Recknagel Weaver Bases - Winc. 70 Mag. >1964 [.-3025]1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Krieghoff K-80 Sport Logo Cap Navy & Red
Manufacturers
Useful Information