Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)

£228.11
20% VAT incl.


  • Model:57545-0700
Recknagel Weaver/Picatinny Mounts for Zeiss 45º
45º Angle is familiar with the modern Zeiss (ZM), Docter (Z Rail), Meopta (MR Rail), Minox (IS Rail), Leica (Leica Rail) and Schmidt & Bender (LMZ) Rail Scopes.
with QD Polyform Levers

Also available in Tri-Nut Version

Height of Base - 7mm
Contents Supplied - 2x Tip-Off Mounts, 1x Wrench
Code Ref: 57545-0700

These Tip-off mounts are designed to be used with the Zeiss Rifle Scopes, especially the Zeiss Diarange and all scopes with 45º angle. The mounts give a low overall height with the height of the bases being only 7mm. The 2 Tip off blocks have a weaver/picatinny profile and are mounted onto the rail and tightened using Quick Detachable Polyform Levers.

Fitting Tips:
- Remove the two 45º Mounting Blocks from the Recknagel Mounts
- Drop the 45º Mounting Blocks into the Zeiss Rail slot, with the wider part of the block in first.
- Align the holes of the base component of the Recknagel Mount with the 45º Mounting Blocks, then fit the screw going through the Recknagel Mount into the 45º Mounting Block.
- Tighten the screws up fully for both of the 45º Mounting Blocks. Then afterwards slacken them off by a 1/8 turn.
- You are now able to slide the mount into position to suit the picatinny rail or weaver bases.
- We would advise to position the mount on the rail or bases one at a time, tighten up the 45º Mounting Block screws on one of the bases first.
- Once this is secured, repeat for the second base. Carefully align the second base in position and lift it off the rail/weaver base in order to tighten up the 45º Mounting Blocks.

The Recknagel Catalogue has a wide range of products available. If you would like any help with parts or fitting, feel free to call us on 01978 66 00 01. We can offer advise on the best possible solution, and a high quality scope mounting service.

The Recknagel Catalogue is available to browse online.
2 x VFG 3 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x VFG Barrel Cleaning Felts for 7.5mm (Box of 50)2 x Custom Rifles of Great Britain by Bruce Potts2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x VFG Barrel Cleaning Felts for .22 (Box of 500)2 x Black Barrel Case (83cm Internal)3 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x VFG Barrel Cleaning Felts for .375 (Box of 500)1 x Krieghoff Navy Canvas Gun Slip1 x Teague Precision Choke Key1 x VFG Complete Set for .1772 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint3 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x VFG Barrel Cleaning Felts for .44 (Box of 30)2 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)2 x Schultz & Larsen T-Handle Wrench (4mm Hex)2 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)2 x Ebony & Brass 20 Bore Snap Caps2 x VFG Barrel Cleaning Felts for 7.5mm (Box of 500)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights4 x VFG Barrel Cleaning Felts for 10.3mm (Box of 30)1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 500)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)3 x VFG Barrel Cleaning Felts for 8.5mm (Box of 500)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]3 x VFG Barrel Cleaning Felts for 7mm (Box of 500)2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x VFG Barrel Cleaning Felts for 7mm (Box of 50)3 x VFG Barrel Cleaning Felts for .22 (Box of 80)2 x VFG Barrel Cleaning Felts for .45 (Box of 30)1 x Starkie Blue (A.K.A Smurf Poo)2 x VFG Barrel Cleaning Felts for .375 (Box of 40)1 x VFG Adaptor fits Pro Shot Cleaning Rods (8-32 Thread)2 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for VFG Rods Brass1 x VFG Brass Adaptor for VFG Rod 4-4.5mm (Spare)1 x VFG Adaptor for US Rods 7-32 UNC (.22 and Over)1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Contessa Picatinny Rail - CZ 527 (0 MOA)1 x VFG Adaptor fits Tipton Cleaning Rods (8-32 Thread)1 x VFG Adaptor fits Tetra Cleaning Rods (8-32 Thread)2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)3 x Parker Hale Thread to 8-32 Thread Converter2 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)1 x VFG Adaptor from M5 to 1/8" Aluminium1 x VFG Adaptor fits J. Dewey Cleaning Rods (8-32 Thread)1 x VFG Adaptor for VFG Rods (Spare)2 x VFG Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Recknagel Polyform Lever & Nut for Picatinny Mounts1 x Recknagel SOB3D Silencer (Standard Thread)2 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)2 x Krieghoff HIVIZ Pro Sights1 x Recknagel Picatinny Rail Bergara B14 Short, 20 MOA, Alu [.2012]2 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Recknagel SOB3D Silencer (ERA LOC)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Contessa Picatinny Rail - Remington 700 Short (0 MOA)1 x Jones Thru-the-Pad Adjuster3 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Jones Gun Nut Kit1 x Jones Original Pad Adjuster1 x Walkstool Steady1 x WalkStool Spare Leg Joints1 x Recknagel Replacement Polyform Lever [00088-5700]1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Set of Spare Red Spring1 x Schultz & Larsen Take Down Rifle Case1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - Zeiss Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Krieghoff Pro Choke Box1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Ziegler Quick Release Mount for Blaser - Docter/Leica Tempus1 x Krieghoff Spares Kit1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Krieghoff Trigger Screw1 x Bauer HD Series 8x25 Binoculars1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Bauer Outdoor 10x25 Binoculars1 x Bauer Outdoor 8x21 Binoculars1 x AimZonic Compact Camo Sound Moderator1 x AimZonic Plus Camo Sound Moderator2 x VFG 1 Piece Aluminium Cleaning Rod for 7mm and Over + Adaptor2 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 25)2 x VFG Intensive Barrel Cleaning Felts for 8mm (Box of 50)1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x ERATAC Bubble Level [T0940-0002]2 x VFG 3 Piece Aluminium Cleaning Rod for 7mm and Over, + Adaptor1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x VFG Magnetic Felt Clamps for Vices - 100mm1 x VFG 1 Piece Steel Cleaning Rod for .22 - 6.5mm, with Adaptor1 x VFG 1 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x VFG 1 Piece Steel Short Cleaning Rod with 4-4.5mm (.177) Adaptor1 x Schultz & Larsen Professional Bipod by Spartan1 x VFG 3 Piece Aluminium Cleaning Rod for .22 - 6.5mm, + Adaptor1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Picatinny Rail - Sauer 404 (0 MOA)1 x VFG Magnetic Felt Clamps for Vices - 125mm2 x VFG Pull Through Match Pocket Set, for 4-4.5mm1 x VFG Magnetic Felt Clamps for Vices - 80mm1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm2 x VFG Pull Through Pocket Set for .22 Upwards2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x VFG 1 Piece Steel Cleaning Rod for 4-4.5mm (.177), with Adaptor1 x VFG Wipe Length Stopper & Guide - Shotgun1 x VFG 3 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG 1 Piece Steel Cleaning Rod for 7mm and Upwards, with Adaptor1 x VFG Intensive Barrel Cleaning Felts for 20 Bore (Box of 100)1 x Krieghoff Brass Front Sight Bead1 x VFG Intensive Barrel Cleaning Felts for 8.5mm (Box of 40)2 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x VFG Intensive Barrel Cleaning Felts for 9.3mm (Box of 40)1 x VFG Intensive Barrel Cleaning Felts for 16 Bore (Box of 25)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)2 x VFG Intensive Barrel Cleaning Felts for .45 (Box of 30)2 x VFG Intensive Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 50)1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x VFG Intensive Barrel Cleaning Felts for 4-4.5mm (Box of 100)1 x Krieghoff Factory Hanger Pin1 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x VFG Quick Clean Felts for .22 (Box of 80)1 x Silva Dine Duo Kit - Purple/White1 x Gerber Metolius Pocket Folder1 x VFG Barrel Cleaning Felts for 8mm (Box of 500)1 x Bear Grylls Pocket Tool1 x VFG Barrel Cleaning Felts for 9mm (Box of 500)1 x Gerber Paraframe II Fine Edge Knife1 x Anschütz Biathlon Harness1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Krieghoff Comb Wrench (T-Handle)1 x Gerber Basic Fixed Blade Serrated1 x Ex-Demo Krieghoff K-20 1-Barrel Americase (No Cover)1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Krieghoff Ejector Ball and Spring1 x Krieghoff Brass Mid Sight Bead1 x Contessa Picatinny Rail - Tikka M590/M595 (0 MOA)1 x ERATAC Offset Picatinny to UNI-Interface Adaptor [T0530-0000]1 x Winchester 3" Folding Knife1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)
Manufacturers
Useful Information