K-80 Barrel Weight Balance System

£100.00
20% VAT incl.


  • Model:K80BRLW12
K-80 Balance System

The Barrel Weights are positioned under the forearm so are invisible in use. Each pair of weights are 40 g. The weights are 52mm in length, so 3 weights are 156mm and a total of three pairs can be fitted under the forearm, adding a total of 120 g.
This Krieghoff Barrel Weight is for 12b Barrels.
There are no Barrel Weights available for 20b Barrels unfortunately.

Also available for the K-80 Balance System are the K-80 Stock Weights, combining both systems provides maximum flexibility in handling configuration.

Contents Supplied
1 x Krieghoff K-80 12b Barrel Weight
1 x Fitting Wrench
2 x Spare Screws

Only One Pair of weights Supplied. You can fit a total of 3 pairs per K-80 underneath the forearm.

The barrel weights are recommended by Krieghoff to be fitted underneath the forearm. Fitting them in any other place on the barrel is not recommended and is not covered by Krieghoff warranty.

Please see the Krieghoff Barrel Weight Installation Guide

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

Krieghoff Trigger Screw
Krieghoff Trigger Screw
£1.00
20% VAT incl.
Krieghoff C-Clips (E-Clips)
Krieghoff C-Clips (E-Clips)
£1.00
20% VAT incl.
1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Recknagel Weaver Bases - Heym SR 20 [57080-3060]1 x Recknagel Weaver Bases - Browning A-Bolt III [57080-302T]1 x Krieghoff 12b Choke Wrench1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x Recknagel Weaver Bases - FFV Carl Gustaf 1900 [.-3005]1 x Recknagel Weaver Bases - H&K SLB 2000 [..-3008]1 x Recknagel Weaver Bases - Browning T-Bolt [57080-301Q]1 x Krieghoff Factory Hanger Pin1 x Contessa Picatinny Rail - Sauer 90 (0 MOA)1 x Recknagel Weaver Bases - Browning X-Bolt [57080-301P]1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master2 x Parker Hale Thread to 8-32 Thread Converter1 x Recknagel Weaver/Picatinny Mount for Aimpoint Micro [57020-1200]1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)2 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Contessa QD Ultra Low Blaser Mount for Pulsar Night Vision1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa QD Mount for Blaser R8/R93 for Schmidt & Bender Rail1 x Contessa QD Mount for Blaser R8/R93 for Swarovski Rail1 x Krieghoff Trigger Screw1 x Recknagel Swarovski Rail Components for Optilock Base - 5mm BH1 x Contessa Quick Release Mount for Swarovski Rail1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Contessa Ultra Low Quick Release Mount for Zeiss CP/Doctor1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (QD Lever)1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Extra Extended Front & Rear Picatinny Rail - Blaser1 x Recknagel Weaver Bases - Remington 700 (6-48) [..3012]1 x Contessa One Piece QD Picatinny Mount for Zeiss Rail1 x Krieghoff Navy Gun Slip1 x Recknagel Weaver/Picatinny Mounts for Zeiss Rail 45º (Tri-Nut)1 x Recknagel Weaver/Picatinny Mounts for Swarovski Rail (Tri-Nut)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (20 MOA)1 x Recknagel Weaver/Picatinny Mounts for Zeiss 45º (QD Lever)1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Recknagel Mount for Docter & Zeiss Compact [57070-0000]1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x Recknagel Spare Ring Cap Screw M3.5 x 7.4mm [..0880]1 x Contessa Spare Screw for Sako 75/85 Rails1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Recknagel Spare Tri-Nut Wrench 00088-00861 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Schultz & Larsen Torx Key for Scope Mounts1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Recknagel Spare Screw 6-48 x 7.7mm [..587T]1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Contessa Satin Chromed Picatinny Rail - Tikka T3 / T3X (0 MOA)1 x Contessa Spare Rail Screws 6-48 x 8.5mm Long1 x ERATAC UNI-Interface Picatinny Rail, 56mm [T0905-0008]1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Contessa Lightweight Alloy Picatinny Mount for Docter Red Dot Sight1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x ERATAC 30mm Ring with UNI-Interface [03680-5730]1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Recknagel Picatinny Rail Krico 700/900/902*, Alu [..0006]1 x Contessa Picatinny Rail - BRNO 98 (0 MOA)1 x Krieghoff Trigger & Selector Locking Wrench1 x Contessa Picatinny Rail - CZ 550 Standard (0 MOA)1 x Recknagel Picatinny Rail Remington 700 L, Steel [..0112]1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff .410g Choke Wrench
Manufacturers
Useful Information