K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x AimZonic Plus Camo Sound Moderator3 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Contessa Picatinny Extended Rail - Blaser R8/R93 (0 MOA)2 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm3 x Krieghoff HIVIZ Pro Sights1 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)1 x Schultz & Larsen Professional Bipod by Spartan2 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount1 x VFG Barrel Cleaning Felts for .44 (Box of 250)1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm2 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Krieghoff Brass Front Sight Bead1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)2 x Schultz & Larsen Superdome IR Moderator (Over Barrel)1 x Krieghoff "K" Denim Cap - Grey2 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set2 x Krieghoff Woven Fabric Patch1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)2 x Schmierfix Grease by Liqui Moly1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x Krieghoff Ejector Ball and Spring2 x K-80 Forward Position Trigger - Steel1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Krieghoff K-80 Badge "K-80 Sport" Logo1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Krieghoff Trigger Screw2 x Krieghoff Spares Kit1 x Anschütz Biathlon Harness2 x Krieghoff Pro Choke Box1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x VFG Intensive Barrel Cleaning Felts for 9mm (Box of 40)1 x Briley 12b Speed Wrench - For Krieghoff Factory Chokes2 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Contessa Blued Ergal Picatinny Rings - 30mm (8mm BH)1 x Walkstool Steady2 x Jones Gun Nut Kit1 x VFG Pull Through Match Pocket Set, for 4-4.5mm2 x Briley 20b Speed Wrench - For Krieghoff2 x Parker Hale Thread to 8-32 Thread Converter2 x Jones Thru-the-Pad Adjuster1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Jones Original Pad Adjuster1 x Briley 12b Speed Wrench - For Briley Spectrum Chokes1 x ERATAC 34mm Ring with UNI-Interface [03680-5734]1 x VFG Barrel Cleaning Felts for 9mm (Box of 40)1 x WalkStool Spare Leg Joints1 x WalkStool Comfort 65 (65cm/26in)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x ERATAC Bubble Level [T0940-0002]1 x Black Leather Shell/Cartridge Pouch1 x Ziegler Quick Release Mount for Blaser - 30mm Rings (+3.5mm)1 x Bauer Outdoor 8x21 Binoculars1 x MSA Sordin - Hygiene Kit - Foam Seals1 x Custom Rifles of Great Britain by Bruce Potts1 x Schultz & Larsen Take Down Rifle Case1 x Ziegler Quick Release Mount for Blaser - Swarovski Rail1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)3 x Krieghoff Comb Wrench (T-Handle)1 x AimZonic Compact Camo Sound Moderator1 x Ziegler Quick Release Mount for Blaser - 1 inch Rings1 x Ziegler Quick Release Mount for Blaser - 30mm Rings1 x MSA Sordin - Supreme Pro X Earmuffs (with Foam Seals)1 x Black Barrel Case (83cm Internal)1 x Gerber Metolius Pocket Folder1 x Contessa Picatinny Rail - Sauer 202 (20 MOA)1 x Teague Precision Choke Key1 x Ziegler Quick Release Mount for Blaser - Picatinny Rail2 x Krieghoff Extended Pillars for Adjustable Comb1 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings (+3.5mm)1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x Ziegler Quick Release Mount for Blaser - 40mm Rings1 x Starkie Blue (A.K.A Smurf Poo)1 x K-80 Standard Trigger - Titanium1 x K-80 Standard Trigger - Black Titanium1 x K-80 Standard Trigger - Gold Plated1 x K-80 Forward Position Trigger - Black Titanium1 x K-80 Forward Position Trigger - Titanium1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Gold Plated1 x K-80 Standard Trigger - Steel1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8244]1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff Factory Hanger Pin1 x Krieghoff Stock - Hybrid Adjustable, RH, Cat 03 [8733]1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Krieghoff 2013 Badge (Collectors Badge)1 x Krieghoff Safety Catch Locking Screw Wrench
Manufacturers
Useful Information