K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

1 x Schultz & Larsen Professional Bipod by Spartan1 x Contessa CZ 452/455 Euro Rail Base for Quick Release Mount2 x Contessa Picatinny Rail - Anschutz 54/64 (0 MOA)2 x Krieghoff K80 Speed Wrench for Factory Chokes1 x Contessa Chromed Picatinny Rail - Sako 75/85 X-Short, Adjustable (20 MOA)2 x Contessa Lightweight Alloy QD Picatinny Mount for Aimpoint1 x VFG Barrel Cleaning Felts for .44 (Box of 250)3 x Krieghoff Spares Kit3 x Krieghoff Premium ABS Case for Two Guns (K-80/K-20)1 x Anschütz Biathlon Harness1 x Krieghoff Brass Front Sight Bead2 x Krieghoff Premium ABS Case for Two Barrels (K-80/K-20)1 x VFG Adaptor for Parker Hale English Rods (up to 6.5mm)2 x Contessa Picatinny Rail - Sako 75/85 Short (0 MOA) Adjustable1 x VFG Barrel Cleaning Felts for 6mm (Box of 50)1 x Ex-Demo Steel Factory Choke Tube, K-80 #4 (06)1 x Ex-Demo Steel Factory Choke Tube, K-80 #2 (09)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (08)1 x Ex-Demo Steel Factory Choke Tube, K-80 #3 (07)1 x VFG Barrel Cleaning Felts for .22 (Box of 80)1 x VFG Intensive Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Barrel Cleaning Felts for .44 (Box of 30)1 x VFG Intensive Barrel Cleaning Felts for 7.5mm (Box of 50)1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Krieghoff Pro Choke Box1 x Krieghoff Trigger Screw1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Recknagel SECURA Sling Swivel - 20mm Wide - 6mm [22009-1000]1 x Contessa Picatinny Rail - Sauer 404 (0 MOA)2 x Krieghoff Woven Fabric Patch1 x Chapman Precision Screwdriver Set 1000, 75 Piece - Mity Master1 x Contessa Tactical Picatinny Ring Mount, Brown (with Rail) - 30mm1 x Krieghoff "K" Denim Cap - Grey1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)1 x Krieghoff K-80 Sport Logo Cap Navy & Red1 x Recknagel Picatinny Rail Tikka T3 / T3X, 0 MOA, Alu [..0081]1 x Contessa Tactical Picatinny Ring Mount, Green (with Rail) - 30mm1 x Contessa Tactical Picatinny Ring Mount, Black (with Rail) - 30mm1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x VFG Intensive Barrel Cleaning Felts for 6mm (Box of 500)1 x Krieghoff Navy Canvas Gun Slip1 x VFG Barrel Cleaning Felts for 6mm (Box of 500)1 x Schultz & Larsen Take Down Rifle Case2 x Bauer Outdoor 8x21 Binoculars1 x Ebony & Brass 20 Bore Snap Caps1 x Schmierfix Grease by Liqui Moly1 x Contessa 25.4mm Rings for Simple Black - 7.5mm (High)1 x Recknagel Replacement Polyform Lever [00088-5700]1 x Bauer ED 8x50 Binoculars1 x K-80 Forward Position Trigger - Black Titanium1 x Gerber GDC Zip Blade1 x Contessa 35mm Rings for Simple Black - 7.5mm (High)1 x K-80 Forward Position Trigger - Titanium1 x Walkstool Steady1 x WalkStool Comfort 65 (65cm/26in)1 x WalkStool Spare Leg Joints1 x ERATAC UNI-Interface Picatinny Rail, 85mm [T0908-0013]1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)1 x Contessa Picatinny Rail - Remington 700 Long Extended (0 MOA)1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Clearance Americase Cordura Case Cover (34.5x12x5")1 x AA x 4 Camelion Plus Alkaline Batteries2 x Bauer HD Series 8x25 Binoculars1 x K-80 Standard Trigger - Gold Titanium1 x K-80 Forward Position Trigger - Gold Plated1 x Clearance Krieghoff Classic Rifle Americase (No Cover)1 x LED Lenser Car Charger1 x AimZonic Compact Camo Sound Moderator1 x Krieghoff Trigger & Selector Locking Wrench1 x Krieghoff 28b Choke Wrench1 x Contessa Lightweight Alu Picatinny Rings - 36mm (8mm BH)1 x Bauer HD 8x42 Binoculars1 x Recknagel Steel Stock Trap Door1 x Contessa Schultz & Larsen Euro Rail Base for Quick Release Mount1 x Krieghoff Stock - Parcours Non-Adjustable, LH, Cat C1 [8280]1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x Krieghoff Stock Removal Wrench2 x Jones Original Pad Adjuster1 x Contessa Picatinny Rail - Bergara B13 (0 MOA)1 x Briley T Wrench for K-80 Parcours Briley Chokes1 x Contessa Picatinny Rail - Bergara B14 Long (20 MOA)1 x Contessa Lightweight Alu Picatinny Rings - 1 Inch (8mm BH)1 x K-80 Stock Weight for Balance System1 x Bauer ED 8x32 Binoculars1 x Krieghoff "K" Denim Cap - Navy1 x Krieghoff C-Clips (E-Clips)
Manufacturers
Useful Information