K-80 Stock Bolt & Weight Balance System

£130.00
20% VAT incl.

Available Options

  • Model:K80STOCKWEIG
K-80 Stock Bolt & Weight Balance System
K-80 Stock Weight System - Bolt & Weight/s

The stock screw system is installed in the stock bolt access hole under the recoil pad. Installation is simple and involves only removing the original stock bolt and replacing it with the new longer stock bolt.
Please Note: Some stocks may have been shortened along with the stock bolt. To ensure you don't fit the new bolt and risk damaging your gun, please check the length of your existing bolt. You should not be exceeding 8 turns of the stock bolt when fitting. More than 8, feel free to contact us regarding shortening the bolt length.

The length of the longer stock bolt is 292mm.
Length of stock bolt from thread to mid piece is 168mm. This replacement bolt is designed to fit in place of existing stock bolts of 160mm in length.
The washers provide a slight amount of spring tension when tightening up the stock bolt. Please note the washer arrangement in the photo and the Stock Weight Instruction Sheet.

The balance screw carries an adjustable weight that can be positioned anywhere on the top section of the balance screw. The longer stock bolt itself weights an additional 40g in weight to the standard bolt and each weight adds another 30g. A possible 5 weights can be added to the longer stock bolt, totalling 150g. This added to the additional 40g of the stock bolt means you can add up to 190g to the rear end of the gun.

Also available for the K-80 Balance System are the K-80 Barrel Weights, combining both systems provides maximum flexibility in handling configuration.

There are different Options for purchasing:
- Stock Weight Screw with ONE Stock Weight
- Stock Weight Screw with TWO Stock Weights
- Additional Individual Weights are available.

We Can Only Accept Orders from UK & Ireland Only
 Please Note: This Product is only permitted to be sold in the UK and Ireland from this website. Any International Orders will be cancelled and refunded. You will be contacted if this is the case. If you would like to order Krieghoff parts, please contact your national distributor.



You might also like...

K-80 Forward Position Trigger - Titanium
K-80 Forward Position Trigger - Titanium
£320.00
20% VAT incl.
View
Krieghoff Sight Bead Blanking Screw
Krieghoff Sight Bead Blanking Screw
£1.00
20% VAT incl.
View
Krieghoff Trigger & Selector Locking Wrench
Krieghoff Trigger & Selector Locking Wrench
£1.50
20% VAT incl.
View
Krieghoff Safety Catch Locking Screw Wrench
Krieghoff Safety Catch Locking Screw Wrench
£1.50
20% VAT incl.
View
Quick Find
or Search Keywords in
Advanced Search
Shopping Cart
1 x Bauer HD 8x42 Binoculars1 x ERATAC Offset UNI-Interface for Aimpoint Sight [T0970-0000]1 x Contessa Lightweight Alloy Picatinny Mount for Aimpoint1 x Krieghoff "K" Mesh Cap - Black1 x Krieghoff "K" Logo Cap Navy & White1 x Jones Original Pad Adjuster1 x Schultz & Larsen Professional Bipod by Spartan1 x Krieghoff Navy Canvas Gun Slip1 x Contessa Satin Chromed Picatinny Rail - Howa Short (20 MOA)1 x Recknagel One Piece Tip-off Mounts for Zeiss Rail [57045-0110]1 x Chapman Precision Screwdriver Set 5859, 44 Piece (SAE & Metric)2 x Recknagel Steel Stock Trap Door1 x VFG Adaptor for Parker Hale English Rods (over 7mm)1 x VFG Adaptor for VFG Rods (Spare)1 x K-80 Stock Weight for Balance System1 x Black Barrel Case (83cm Internal)1 x VFG Intensive Barrel Cleaning Felts for 7mm (Box of 50)1 x Contessa Anschutz 54 Euro Rail Base for Quick Release Mount1 x Schmierfix Grease by Liqui Moly1 x Contessa Quick Release Picatinny Mount for Docter/Leica Red Dot Sights1 x Chapman Precision Screwdriver Set 5575, 56 Piece - Master Set1 x Krieghoff Front Sight Bead (Standard)1 x ERATAC Bubble Level for Picatinny Rail [T0550-0000]1 x Chapman Precision Screwdriver Set 8955, 36 Piece (Metric)1 x Contessa 30mm Rings for Simple Black - 10.0mm (X-High)1 x Anschütz Biathlon Harness1 x Krieghoff Premium ABS Case, Single Gun (K-80/K-20)1 x ERATAC UNI-Interface Picatinny Rail, 35mm [T0903-0008]1 x Contessa Satin Chromed Picatinny Rail - Howa Short (0 MOA)1 x VFG Barrel Cleaning Felts for 4-4.5mm (Box of 500)1 x Krieghoff K-80 Sport Logo Cap Black & Red1 x WalkStool Comfort 65 (65cm/26in)1 x Contessa Picatinny Rail - Tikka T3 / T3X (10 MOA)1 x Walkstool Steady1 x WalkStool Spare Leg Joints2 x VFG Barrel Cleaning Felts for .44 (Box of 250)2 x Parker Hale Thread to 8-32 Thread Converter1 x VFG Brass Adaptor for US Rods 8-32 UNC (.22 and Over)1 x Clearance Americase Cordura Case Cover (32x11x3")1 x Contessa QD Mount for Blaser R8/R93 for Zeiss/Leica/Docter Rail1 x Contessa QD Mount for Blaser for ATN X-Sight II1 x Contessa Picatinny Rail - Blaser R8/R93 (0 MOA)1 x Ziegler Quick Release Mount for Blaser - 34mm Rings1 x Briley 12b Speed Wrench - For Krieghoff Parcours Briley Chokes1 x Krieghoff Factory Hanger Pin1 x Silva Map Measurer (Mechanical)1 x Contessa Picatinny Rail - Sauer 200 Short (0 MOA)1 x Jones Thru-the-Pad Adjuster1 x Krieghoff Stock - Parcours Non-Adjustable, RH, Cat C1 [8005]1 x Contessa QD Rear Extended Picatinny Rail Mount for Blaser1 x D Cell x 2 Camelion Plus Alkaline Batteries1 x Recknagel Spare Nut for Picatinny Mounts [00001-045A]1 x VFG Barrel Cleaning Felts for 6.5mm (Box of 50)1 x VFG Intensive Barrel Cleaning Felts for .22 (Box of 80)
£10,725.79
Manufacturers
Useful Information
Picatinny Rail Finder
Bestsellers
Kick-Eez All Purpose Pad (301) Recoil Pad Spacer (1/4" or 1/8" Thick) K-80 Barrel Weight Balance System